background image

Table 3. Compute node specifications (continued)

Specification

Description

Size

Node 
•  Height: 41.0 mm (1.7 inches)
•  Depth: 562.0 mm (22.2 inches)
•  Width: 222.0 mm (8.8 inches)
•  Weight: 

–  Minimum weight: 3.5 kg (7.7 lb)
–  Maximum weight: 7.5 kg (16.6 lb)

Environment

The ThinkAgile VX3720 complies with ASHRAE class A2 specifications. 
Depending on the hardware configuration, some solution models comply with 
ASHRAE Class A3 or Class A4 specifications. System performance may be impacted 
when operating temperature is outside ASHRAE A2 specification or fan failed 
condition. To comply with ASHRAE Class A3 and Class A4 specifications, the 
ThinkAgile VX3720 needs to meet the following hardware configuration requirements:

•  Lenovo supported processors.

For unsupported processors, see the following attention for details

1

.

•  Lenovo supported PCIe adapters.

For unsupported PCIe adapters, see the following attention for details

2

.

•  Two power supplies installed for redundancy.

1100-watt power supplies are not supported.

The ThinkAgile VX3720 is supported in the following environment: 
•  Air temperature:

Power on

3

–  ASHRAE Class A2: 10°C - 35°C (50°F - 95°F); Above 900 m (2,953 ft), de-rated 

maximum air temperature 1°C / 300m (984 ft)

–  ASHRAE Class A3: 5°C - 40°C (41°F - 104°F); Above 900 m (2,953 ft), de-rated 

maximum air temperature 1°C / 175m (574 ft)

–  ASHRAE Class A4: 5°C - 45°C (41°F - 113°F); Above 900 m (2,953 ft), de-rated 

maximum air temperature 1°C / 125m (410 ft)

Power off

4

: 5°C to 45°C (41°F to 113°F)

•  Maximum altitude: 3,050 m (10,000 ft)
•  Relative Humidity (non-condensing):Power on

3

–  ASHRAE Class A2: 8% - 80%, maximum dew point : 21°C (70°F)
–  ASHRAE Class A3: 8% - 85%, maximum dew point : 24°C (75°F)
–  ASHRAE Class A4: 8% - 90%, maximum dew point : 24°C (75°F)

Shipment/storage: 8% - 90%

•  Particulate contamination:

Airborne particulates and reactive gases acting alone or in combination with other 
environmental factors such as humidity or temperature might pose a risk to the 
solution. 

Power rating 

12 V DC, 60 A

Attention: 

1.  The following processors are not supported with ASHRAE Class A3 and Class A4 specifications: 

•  165W processor, 28-core, 26-core or 18-core (Intel Xeon 8176, 8176M, 8170, 8170M, and 6150)

•  150W processor, 26-core, 24-core, 20-core, 16-core or 12-core (Intel Xeon 8164, 8160, 8160M, 8158, 

6148, 6142, 6142M, and 6136)

•  140W processor, 22-core or 18-core (Intel Xeon 6152, 6140, and 6140M)

•  140W processor, 14-core (Intel Xeon 6132)

8

ThinkAgile VX Enclosure ThinkAgile VX3720 User’s Guide

Summary of Contents for ThinkAgile VX3720 7Y12







































































































Reviews: