4.
Note the front audio and USB assembly cables routing and remove the screw
that secures the front audio and USB assembly to the chassis.
5.
Remove the front audio and USB assembly.
6.
Route the cables for the new front audio and USB assembly through the hole in
the chassis to the system board.
7.
Install the new front audio and USB assembly into the chassis and secure it
with the screw.
8.
Connect the new front audio and USB assembly cables to the system board. See
“Locating parts on the system board” on page 88.
9.
Reinstall the front bezel.
What to do next:
v
To work with another piece of hardware, go to the appropriate section.
v
To complete the replacement, go to “Completing the FRU replacement.”
Completing the FRU replacement
This section provides instructions on how to complete the FRU replacement.
After replacing the FRUs, you need to reinstall any removed parts, reconnect and
route any internal cables, reinstall the computer cover, and reconnect any external
cables, such as power cords. Depending on the FRUs replaced, you might need to
confirm the updated information in the Setup Utility program, see Chapter 6,
“Using the Setup Utility,” on page 51.
Note:
When the power cord is first plugged in, the computer might appear to turn
on for a few seconds and then turn off. This is a normal sequence to enable
the computer to initialize.
Figure 34. Removing the front audio and USB assembly
116
Hardware Maintenance Manual
Summary of Contents for THINKCENTRE 3317
