background image

Lenovo Companion

Your computer’s best features and capabilities should be easy to access and understand. With Lenovo
Companion, they are. Use Lenovo Companion to do the following:

– Optimize your computer’s performance, monitor your computer’s health, and manage updates.

– Access your user guide, check warranty status, and view accessories customized for your computer.

– Read how-to articles, explore Lenovo forums, and stay up-to-date on technology news with articles

and blogs from trusted sources.

Lenovo Companion is filled with exclusive Lenovo content to help you learn more about what you
can do with your computer.

• For Windows 7, Windows 8, Windows 8.1, and Windows 10:

Lenovo Device Experience or Lenovo PC Experience

The Lenovo Device Experience or Lenovo PC Experience program helps you work more easily and
securely. The program provides easy access to Lenovo ThinkVantage Tools or Lenovo Tools, important
settings and information about your computer, the Lenovo Support Web site, and so on.

Lenovo Solution Center

The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information,
along with hints and tips for maximum system performance.

Power Manager

The Power Manager program provides convenient, flexible, and complete power management for
your computer. It enables you to adjust your computer power settings to achieve the best balance
between performance and power saving.

REACHit or Lenovo Reach

The REACHit or Lenovo Reach program enhances your cloud experience. This program keeps you
connected at all times and enables you to access all your favorite items from personal computers,
smartphones, or tablets. As a result, you can access, edit, and share your files from anywhere. You
also can add your favorite Web services to your cloud desktop and stay logged-in to Web sites with
the cloud password manager.

SHAREit or Lenovo SHAREit

The SHAREit or Lenovo SHAREit program provides a quick and easy way to share files and folders
among computers, smartphones, tablets, or smart TVs with the Android or the Windows operating
system installed. SHAREit or Lenovo SHAREit uses any type of network or even no network at all to
share files and folders.

System Update

The System Update program provides regular access to the system updates for your computer, such
as device driver updates, software updates, and BIOS updates. The program gathers information from
the Lenovo Help Center about new updates for your computer, then sorts and displays the updates for
download and installation. You have complete control of which updates to download and install.

Locations

This section provides information to help you locate the connectors on the front and rear of your computer,
parts on the system board, and components and internal drives in your computer.

Note:

The components in your computer might look slightly different from the illustrations.

Chapter 1

.

Product overview

7

Summary of Contents for ThinkCentre M73



































































































































































Reviews: