background image

Serial connector problems

Problem

Solution

The serial connector cannot be accessed.

•  Connect the serial cable from the serial connector on the computer 

to the serial device. If the serial device has its own power cord, 
connect the power cord to a grounded electrical outlet.

•  Turn on the serial device and keep the device online.

•  Install any programs supplied with the serial device. Refer to the 

documentation that comes with the serial device for more 
information.

•  If you added one serial-connector adapter, ensure that the adapter 

is installed correctly.

USB device problems

Problem

Solution

A USB device cannot be accessed.

•  Connect the USB cable from the USB connector to the USB 

device. If the USB device has its own power cord, connect the 
power cord to a grounded electrical outlet.

•  Turn on the USB device and keep the device online.

•  Install any device drivers or programs supplied with the USB 

device. Refer to the documentation that comes with the USB 
device for more information.

•  Disconnect and reconnect the USB connector to reset the USB 

device.

•  Ensure that the Smart USB Protection function is disabled in UEFI 

BIOS.

Software problems

Problem

Solution

Some programs do not work as expected.

1.  Check whether the problem is caused by a program. 

a.  Ensure that the software is compatible with the computer. 

Refer to the information supplied with the software for more 
information.

b.  Verify that other software works correctly on the computer.

c.  Verify that the software you are using works on another 

computer.

2.  If the problem is caused by a program: 

•  Refer to the printed documentation that comes with the 

program or the help system of the program.

•  Update the program.

•  Uninstall the program and then reinstall it. To download a 

program that is preinstalled on your computer, go to 

https:// 

pcsupport.lenovo.com

and follow the on-screen instructions.

Lenovo diagnostic tools

For information about Lenovo diagnostic tools, go to: 

Chapter 6

.

Troubleshooting, diagnostics, and recovery

23

Summary of Contents for ThinkCentre neo 50s Gen 3





























































Reviews: