Using the Personalization Editor
11
Insert the backup copy of the
Utility Diskette for DOS,
Personalization
into the diskette drive; then power on the
computer.
12
Select Update personalization data at the menu
window; then follow the instructions on the window.
Your data is copied from the
Utility Diskette for DOS,
Personalization and stored in the nonvolatile memory in the
computer.
13
After the data is stored, power off the computer.
14
Set your password if you have not yet set it.
Click on Help for more information.
The information that you typed in will be displayed the next time you
power on the computer.
Deleting the Personalization Window
To delete the personalization window and revert to the default
password prompt, do the following:
1
Power off the computer.
2
Insert the backup copy of the
Utility Diskette for DOS,
Personalization
into the diskette drive; then power on the
computer.
3
Select Delete personalization data from the menu; then
follow the instructions on the screen.
4
After the data is updated, restart the computer.
Chapter 3. Protecting Your Computer
87
Title: C79EPMST CreationDate: 06/22/98 12:00:09
