Upgrading the Hard Disk Drive
Upgrading the Hard Disk Drive
You can increase the storage capacity of your computer by replacing
the original, built-in hard disk drive with an optional one. You can
purchase the option from your IBM reseller or IBM marketing
representative.
To replace the hard disk drive, do the following:
1
Power off the computer; then disconnect the AC Adapter
and all cables from the computer.
2
Remove the battery pack.
(
“Replacing the Battery
Pack” on page 34.)
Replace the hard disk drive only if you upgrade it or have it
repaired. You should not replace it often.
Handling a Hard Disk Drive
Do not drop or apply any shock.
Do not apply pressure to the cover.
Do not touch the connector.
The drive is very sensitive. Incorrect handling can cause
damage and permanent loss of data on the hard disk. Before
removing the hard disk drive, make a backup copy of all the
information on the hard disk. Never remove the drive while the
system is operating, in suspend mode, or in hibernation mode.
Chapter 2. Extending the Features of Your Computer
47
Title: C79EPMST CreationDate: 06/22/98 12:00:09