Memory module
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
and print the following instructions.
Attention:
Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See “Disable Fast Startup and the built-in battery” on page 37.
2. Turn off the computer and disconnect the computer from ac power and all connected cables. Then,
close the computer display.
3. Remove the nano-SIM-card tray if your computer comes with one. See “Connect to a cellular network
(for selected models)” on page 9.
4. Turn over the computer.
5. Remove the base cover assembly. See “Base cover assembly” on page 38.
Removal procedure
Installation procedure
Note:
You can install the memory in any slot.
41
Summary of Contents for ThinkPad P15p Gen 1
