Solution
: To bring up the image, press F7 and select the desired monitor. If the problem persists, do
the following:
1. Connect the external monitor to another computer to ensure that it works.
2. Reconnect the external monitor to your computer.
3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates that
are supported.
– If the external monitor supports the same resolution as the computer display or a higher resolution,
view output on the external monitor or on both the external monitor and the computer display.
– If the external monitor supports a lower resolution than the computer display, view output on the
external monitor only. (If you view output on both the computer display and the external monitor,
the external monitor screen will be blank or distorted.)
•
Problem
: You cannot set a higher resolution than the present one on your external monitor.
Solution
:
– Ensure that the monitor information is correct. Do the following:
1. Right-click on the desktop, and click
Screen resolution
.
Note:
If your computer cannot detect the external monitor, click the
Detect
button.
2. Click the icon for the desired monitor (the
Monitor-2
icon is for the external monitor).
3. Click
Advanced Settings
.
4. Click the
Adapter
tab.
5. Ensure that the correct device driver name is shown in the adapter information window.
Note:
The device driver name depends on the video chip that has been installed on your computer.
6. Click
OK
.
If the information is incorrect, reinstall the device driver.
– Check the monitor type and, if necessary, update the driver by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an
electrical outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click
Screen resolution
.
Note:
If your computer cannot detect the external monitor, click the
Detect
button.
4. Click the icon for the desired monitor (the
Monitor-2
icon is for the external monitor).
5. Click
Advanced Settings
.
6. Click the
Monitor
tab. Check the monitor information window to ensure that the monitor type is
correct. If it is, click
OK
to close the window; otherwise do the following.
7. If more than one monitor type is displayed, select
Generic PnP Monitor
or
Generic Non-PnP
Monitor
.
8. Click
Properties
. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
9. Click the
Driver
tab.
10. Click
Update Driver
.
11. Click
Browse my computer for driver software
, and then click
Let me pick from a list of
device drivers on my computer
.
12. Clear the
Show compatible hardware
check box.
110
User Guide
Summary of Contents for ThinkPad S440
