4. If the memory module already is in the memory slot, open the latches on both sides of the slot at the
same time
1
, and then remove the memory module
2
. Save the removed memory module for future use.
5. Place the notched end of the new memory module toward the contact edge side of the memory slot,
and insert the memory module 1
1
into the slot at an angle of about 20 degrees. Pivot the memory
module downward until it snaps into place
2
. Ensure that the memory module is firmly installed in
the slot and cannot be moved easily.
Attention:
To avoid damaging the memory module, do not touch its contact edge.
6. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 66.
7. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing a Mini PCI ExpressCard for wireless LAN connection
Before you start, print these instructions.
70
User Guide
Summary of Contents for ThinkPad S440
