Using the mini DisplayPort connector
Your computer has a mini DisplayPort connector, which is a digital display interface for connection to
various external devices, such as Cathode Ray Tube (CRT) monitors, LCD monitors, projectors, or even
high-definition televisions. This compact connector enables a plug-and-play setup and supports adapters
that can plug into DVI, VGA, or High-Definition Multimedia Interface (HDMI
™
) connectors.
The mini DisplayPort connector of your computer supports audio as well as video streaming.
Setting up a presentation
To display information and make presentations, you can connect a data projector to your computer through
the VGA connector or mini DisplayPort connector on your computer.
Note:
It may take several seconds before the projector displays the image. If you do not see your desktop
displayed after 60 seconds, try pressing the F7 key to switch between different display output locations.
Your projector might have one or more audio-input connectors. To project sound, you need to attach
the combo audio connector on your computer to these connectors, using an audio cable (commercially
available).
Using dual displays
This section introduces the Duplicate and Extend desktop functions that enable you to display output on
both the computer display and an external monitor.
Using the Duplicate or Extend desktop function
With the Duplicate desktop function, you can display the same output on both the computer display and
an external display. You also can display different desktop images on each monitor with the Extend
desktop function.
You can use the Duplicate or Extend desktop function without changing any settings. If the function does
not work, refer to the following topic on how to enable the Duplicate or Extend desktop function.
Enabling the Duplicate or Extend desktop function
To enable the Duplicate or Extend desktop function, do the following:
1. Connect the external monitor to your computer; and then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Press F7, then select
Duplicate
or
Extend
.
To change the resolution for each monitor, do the following:
1. Right-click on the desktop, and click
Screen resolution
.
2. Click the
Monitor-1
icon, which is for the primary display (the computer display by default).
3. Set the resolution for the primary display.
4. Click the
Monitor-2
icon, which is for the secondary display (the external display by default).
5. Set the resolution for the secondary display.
6. Click
Advanced settings
and set up the color quality on the
Monitor
tab.
7. Click
OK
to apply the changes.
Considerations for using the Extend desktop function
•
In Extend desktop mode, only the primary display shows DOS full-screen, and the other display is
blacked out.
41
Summary of Contents for Thinkpad T440
