Checking the battery status
The battery-status icon in the Windows notification area displays the percentage of battery power remaining.
The rate at which you use battery power determines how long you can use the battery of your computer
between charges. Because of different user habits and needs, it is difficult to predict how long a battery
charge will last. There are two main factors:
• How much energy is stored in the battery when you begin to work.
• The way you use your computer. For example:
– How often you access the solid-state drive.
– How bright you make the computer display.
– How often you use the wireless features.
To check for detailed battery status information, do the following:
• For Windows 8.1: Start the Lenovo Settings program and click
Power
.
• For Windows 7: Start the Power Manager program and click the
Battery
tab.
Enabling the battery alarm on the Windows 7 operating system
For the Windows 7 operating system, you can program your computer so that when the battery power falls
below a certain level, three events occur: the alarm goes off, a message is displayed, and the LCD is
turned off.
To enable the battery alarm, do the following:
1. Start the Power Manager program.
2. Click the
Global Power Settings
tab.
3. For
Low battery alarm
or
Critically low battery alarm
, set the percentage of the power level and set
the action.
Note:
If your computer enters sleep or hibernation mode when the battery is low, but the alarm message
has not yet been displayed, the message will be displayed when the computer resumes. To resume normal
operation, when the message is displayed, click
OK
.
Using the ac power adapter
The power to run your computer can come either from the lithium-ion (Li-ion) built-in battery, or from ac
power through the ac power adapter. While you use ac power, the battery charges automatically.
The ac power adapter that comes with your computer has two basic components:
• The transformer pack that converts ac power for use with the computer.
• The power cord that plugs into the ac outlet and into the transformer pack.
Attention:
Using an improper power cord might severely damage your computer.
Connecting the ac power adapter
To connect the ac power adapter, do the following:
Note:
Ensure that you perform the actions in the order in which they are listed.
1. Plug the ac power adapter into an electrical outlet.
2. Connect the power cord to the transformer pack.
3. Connect the ac power adapter to the ac power connector of the computer.
34
User Guide
Summary of Contents for ThinkPad X1 Carbon
