•
Weak signal
•
Medium signal
•
Strong signal
Using the Bluetooth connection
Bluetooth can connect devices a short distance from one another, and is commonly used for connecting
peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or
remotely controlling and communicating with devices such as mobile phones.
Depending on the model, your computer might support the Bluetooth feature. To transfer data through
the Bluetooth feature, do the following:
1. Ensure that the Bluetooth feature is enabled.
• If you are using the Windows 8.1 operating system, the Bluetooth feature is enabled by default.
• If you are using the Windows 7 operating system, to enable the Bluetooth feature, tap the wireless
icon
in the Function mode to enable or disable the wireless features, and then follow the
instructions on the screen. For more information on how to display the Function mode, see “Adaptive
Keys overview” on page 25.
2. Locate the data you want to send and right-click the data.
Note:
If you are using the Windows 8.1 operating system, go to the desktop screen first, locate the data
you want to send, and then right-click the data.
3. Select
Send To
➙
Bluetooth Devices
.
4. Select a Bluetooth device, and then follow the instructions on the screen.
Note:
If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a
Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature
can be degraded.
For more information, refer to the Windows help information system and the Bluetooth help information
system.
Using the NFC connection
NFC is a high-frequency and short-range wireless communications technology. Depending on the
model, your computer might come with an NFC card. By using the NFC feature, you can establish radio
communications between your computer and another NFC-enabled device over a distance no more than a
few centimeters. Before you use the NFC feature, ensure that the
NFC device
option is set to
Enabled
in the ThinkPad Setup program. See “Security menu” on page 98.
By default, the NFC feature is enabled. If you have disabled the NFC feature, do the following to enable
the NFC feature:
•
For the Windows 7 operating system:
1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 93.
2. Select
Security
➙
I/O Port Access
.
3. Set the
NFC device
option to
Enabled
.
•
For the Windows 8.1 operating system:
1. Go to the desktop and move the pointer to the top-right or bottom-right corner of the screen to bring
up the charms. Then click
Settings
➙
Change PC settings
➙
Network
➙
Radio devices
.
2. Slide the NFC switch to the right to enable the NFC feature.
42
User Guide
Summary of Contents for ThinkPad X1 Carbon
