manualshive.com logo in svg

Lenovo ThinkServer RD340, User And Maintenance Manual

The Lenovo ThinkServer RD340 delivers exceptional performance and reliability for businesses. Enhance your server management skills with the User Manual and Hardware Maintenance Manual, available for free download at 88.208.23.73:8080. Access comprehensive instructions and troubleshooting tips to ensure smooth operation of this powerful and efficient server.

Share
Download
background image

Battery recycling information for the European Union

Notice:

This mark applies only to countries within the European Union (EU).

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC
concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the
framework for the return and recycling of used batteries and accumulators as applicable throughout the
European Union. This label is applied to various batteries to indicate that the battery is not to be thrown
away, but rather reclaimed upon end of life per this Directive.

In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate
that they are to be collected separately and recycled at end of life. The label on the battery may also
include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for
cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted
municipal waste, but use the collection framework available to customers for the return, recycling, and
treatment of batteries and accumulators. Customer participation is important to minimize any potential
effects of batteries and accumulators on the environment and human health due to the potential presence of
hazardous substances. For proper collection and treatment, go to:
http://www.lenovo.com/recycling

Recycling information for Brazil

Declarações de Reciclagem no Brasil

Descarte de um Produto Lenovo Fora de Uso

Equipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos de
coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas
especializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, de
acordo com a legislação local.

A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos. Caso você possua
um produto Lenovo em situação de descarte, ligue para o nosso SAC ou encaminhe um e-mail para:
reciclar@lenovo.com, informando o modelo, número de série e cidade, a fim de enviarmos as instruções
para o correto descarte do seu produto Lenovo.

Requirement for batteries containing perchlorate

The following statement applies to users in the state of California, U.S.A.

California Perchlorate Information:

Products containing CR (manganese dioxide) lithium coin cell batteries may contain perchlorate.

190

ThinkServer RD340 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD340

























































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD340

IBM LS42 - BladeCenter - 7902 Service Manual preview
LS42 - BladeCenter - 7902
Brand: IBM Pages: 194
U.S. Converters XS1000 User Manual preview
XS1000
Brand: U.S. Converters Pages: 5
xFusion Digital Technologies FusionServer CH242 V5 Manual preview
FusionServer CH242 V5
Brand: xFusion Digital Technologies Pages: 61
Leightronix UltraNEXUS-HD X5 Product Quick Manual preview
UltraNEXUS-HD X5
Brand: Leightronix Pages: 5
Xyplex MAXserver 1600 Hardware Installation And Maintenance Manual preview
MAXserver 1600
Brand: Xyplex Pages: 58
IBM RS/6000 44P Series 270 Service Manual preview
RS/6000 44P Series 270
Brand: IBM Pages: 346
AIC SB302-LB User Manual preview
SB302-LB
Brand: AIC Pages: 101
Santec SVS-3001 User Manual preview
SVS-3001
Brand: Santec Pages: 40
Supero SuperServer 6123L-8R User Manual preview
SuperServer 6123L-8R
Brand: Supero Pages: 105
Kraun Video Server User Manual preview
Video Server
Brand: Kraun Pages: 36
ZyXEL Communications NPS-520 Quick Start Manual preview
NPS-520
Brand: ZyXEL Communications Pages: 115
AIC SB101-LB User Manual preview
SB101-LB
Brand: AIC Pages: 86
AIC SB402-LB User Manual preview
SB402-LB
Brand: AIC Pages: 97
AIC SB151-LB User Manual preview
SB151-LB
Brand: AIC Pages: 81
Coachsound TourMaster MLA2504 User Manual preview
TourMaster MLA2504
Brand: Coachsound Pages: 22
Transition Networks SDSTX3110-121-LRT-B Quick Start Manual preview
SDSTX3110-121-LRT-B
Brand: Transition Networks Pages: 2
Black Box LRA2900A Getting Started Manual preview
LRA2900A
Brand: Black Box Pages: 66
Supermicro SuperServer AS -2024US-TRT Quick Reference Manual preview
SuperServer AS -2024US-TRT
Brand: Supermicro Pages: 1

Brands by name

Popular brands

Load more brands