manualshive.com logo in svg

Lenovo ThinkServer RD340, User And Maintenance Manual

The Lenovo ThinkServer RD340 delivers exceptional performance and reliability for businesses. Enhance your server management skills with the User Manual and Hardware Maintenance Manual, available for free download at 88.208.23.73:8080. Access comprehensive instructions and troubleshooting tips to ensure smooth operation of this powerful and efficient server.

Share
Download
background image

To install and use the MegaRAID Storage Manager program, refer to the following chapters in the

MegaRAID

SAS Software User Guide

on the documentation DVD that comes with your server:

Note:

Some information in these chapters might be intended for the advanced SATA/SAS hardware RAID

configurations and might not apply to the ThinkServer RAID 300 configurations.

• “MegaRAID Storage Manager Overview and Installation”

• “MegaRAID Storage Manager Window and Menus”

• “Monitoring System Events and Storage Devices”

• “Maintaining and Managing Storage Configurations”

The

MegaRAID SAS Software User Guide

also is available on the Lenovo Web site at:

http://www.lenovo.com/UserManuals

Configuring the advanced SATA/SAS hardware RAID

Before configuring RAID for your server, observe the following precautions:

• Use hard disk drives that are of the same type (SATA or SAS) and have the same capacity within a

single RAID array.

• The total drive capacity of the primary RAID array might be limited to 2 TB.

Some server models come with a RAID card to provide advanced SATA/SAS hardware RAID functions. You
also can purchase a supported RAID card from Lenovo and install it into the server. See “RAID card”
on page 31.

The RAID card provides the WebBIOS Configuration Utility program to help you configure RAID
independently of the operating system. You also can install the MegaRAID Storage Manager program and
the MegaCLI Configuration Utility program to help you manage the RAID array and RAID controller in an
operating system environment.

The installation packages for the MegaRAID Storage Manager program and the MegaCLI Configuration
Utility program are on the

ThinkServer EasyStartup

DVD. After you enter the operating system, insert the

ThinkServer EasyStartup

DVD into the optical drive. The installation packages for the programs are located in

the Utilities and Others folder in the root directory of the DVD.

Note:

The

ThinkServer EasyStartup

DVD is designed for different types of servers and the Utilities and Others

folder might contain additional installation packages that are not required to be installed on your server.

For instructions on how to configure and manage the advanced SATA/SAS hardware RAID, refer to the

MegaRAID SAS Software User Guide

on the documentation DVD that comes with your server. This

document also is available on the Lenovo Web site at:
http://www.lenovo.com/UserManuals

Configuring the Ethernet controllers

The Ethernet controllers are integrated on the system board. They provide an interface for connecting to
a 10 Mbps, 100 Mbps, or 1000 Mbps network and provide full-duplex (FDX) capability, which enables
simultaneous transmission and reception of data on the network.

You do not have to set any jumpers or configure the Ethernet controllers. However, you must install a device
driver to enable the operating system to recognize the controllers.

70

ThinkServer RD340 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD340

























































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD340

IBM 8841 - eServer xSeries 236 Installation Manual preview
8841 - eServer xSeries 236
Brand: IBM Pages: 100
N-Tron ESERV-11T User Manual preview
ESERV-11T
Brand: N-Tron Pages: 55
TYANO GX38-B5550 Service Engineer'S Manual preview
GX38-B5550
Brand: TYANO Pages: 68
ANTAIRA STW-611C Installation Manual preview
STW-611C
Brand: ANTAIRA Pages: 2
Olive Olive 2 User Manual preview
Olive 2
Brand: Olive Pages: 44
Vxl Itona DxxS User Manual preview
Itona DxxS
Brand: Vxl Pages: 19
Black Box PCA35A-R3 User Manual preview
PCA35A-R3
Brand: Black Box Pages: 30
Zonet ZPS3611 - QUICK Quick Installation Manual preview
ZPS3611 - QUICK
Brand: Zonet Pages: 1
Supermicro SuperServer 7089P-TR4T User Manual preview
SuperServer 7089P-TR4T
Brand: Supermicro Pages: 155
NASdeluxe NDL-2400R-R Quick Installation Manual preview
NDL-2400R-R
Brand: NASdeluxe Pages: 6
King Pigeon D224 User Manual preview
D224
Brand: King Pigeon Pages: 19
Dell PowerEdge M630 Owner'S Manual preview
PowerEdge M630
Brand: Dell Pages: 129
Dell PowerEdge HR675 Hardware Owner'S Manual preview
PowerEdge HR675
Brand: Dell Pages: 194
Dell PowerEdge FC630 Owner'S Manual preview
PowerEdge FC630
Brand: Dell Pages: 143
Dell PowerEdge HX574 Hardware Owner'S Manual preview
PowerEdge HX574
Brand: Dell Pages: 202
Dell Wyse 5020 P Series Quick Start Manual preview
Wyse 5020 P Series
Brand: Dell Pages: 8
Dell Wyse 3020 Quick Start Up Manual preview
Wyse 3020
Brand: Dell Pages: 2
Dell Wyse 5030 User Manual preview
Wyse 5030
Brand: Dell Pages: 12

Brands by name

Popular brands

Load more brands