![background image](http://html.mh-extra.com/html/lenovo/thinkserver-rd440/thinkserver-rd440_user-manual-and-hardware-maintenance-manual_202912145.webp)
6. Insert the TPM into the TPM connector on the system board.
Figure 83. Installing the TPM
7. If you have lifted the riser card assembly 1, reinstall it into the chassis. See “Replacing the riser card
assembly 1” on page 183.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 206. Then, you can
configure the TPM function in the Setup Utility program. See “Configuring the TPM function” on page 70.
Removing the TPM
Attention:
Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 87.
This topic provides instructions on how to remove the TPM if the server has one installed.
Chapter 6
.
Installing, removing, or replacing hardware
133
Summary of Contents for ThinkServer RD440
