manualshive.com logo in svg

Lenovo ThinkServer RD450, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD450 is a powerful and reliable server designed for businesses. To ensure optimal performance, it is essential to have the User Manual and Hardware Maintenance Manual. Easily download these comprehensive manuals for free from our website, 88.208.23.73:8080, to optimize your server's functionality and maintenance.

Share
Download
background image

12. Close the microprocessor retainer. Close the small handle

1

first and then close the small handle

2

. Ensure that the retainer is locked into position and the new microprocessor is securely seated in

the socket.

Note:

There are two marks on the microprocessor retainer. Ensure that you close the small handle

marked with

first and then close the small handle marked with

. Always follow the correct sequence

when you close the small handles.

Figure 106. Securing the microprocessor in the socket

13. Use a cleaning pad to wipe the thermal grease from the removed heat sink. Dispose of the cleaning

pad after all of the thermal grease is removed.

14. Use one of the following methods to apply appropriate amount of thermal grease to the top of the newly

installed microprocessor in the shape of a cross or a circle as shown. Using too much or too little
thermal grease can cause a thermal problem due to imperfect contact with the components.

Notes:

• Do not touch the thermal grease.

• Keep the thermal grease off the system board.

Figure 107. Applying the thermal grease to the top of the microprocessor

15. Reinstall the heat sink. See “Installing or replacing a heat sink” on page 124.

16. If you are instructed to return the old microprocessor, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

134

ThinkServer RD450 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD450



































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD450

D-Link DP 301U Quick Installaion Manual preview
DP 301U
Brand: D-Link Pages: 12
Bull NovaScale T820 F2 Manual preview
NovaScale T820 F2
Brand: Bull Pages: 34
NEC Express5800/R120h-1E Manual preview
Express5800/R120h-1E
Brand: NEC Pages: 52
IBM x3100 M5 Type 5457 Installation And Service Manual preview
x3100 M5 Type 5457
Brand: IBM Pages: 688
MSI MS-S0081 Manual preview
MS-S0081
Brand: MSI Pages: 54
HPE ProLiant ML110 Gen 10 Product End-Of-Life Disassembly Instructions preview
ProLiant ML110 Gen 10
Brand: HPE Pages: 5
MSI WindBOX Series User Manual preview
WindBOX Series
Brand: MSI Pages: 18
Stratus ftServer 2500 Site Planning Manual preview
ftServer 2500
Brand: Stratus Pages: 106
NEC Express5800/R320f-E4 Installation Manual preview
Express5800/R320f-E4
Brand: NEC Pages: 88
Fujitsu PRIMERGY SX940 Manual preview
PRIMERGY SX940
Brand: Fujitsu Pages: 44
Fujitsu PRIMERGY RX900 S2 Operating Manual preview
PRIMERGY RX900 S2
Brand: Fujitsu Pages: 114
Fujitsu PRIMERGY RX800 S2 Options Manual preview
PRIMERGY RX800 S2
Brand: Fujitsu Pages: 66
Fujitsu Primergy RX600 Start Manual preview
Primergy RX600
Brand: Fujitsu Pages: 8
Fujitsu PRIMERGY S60 Manual preview
PRIMERGY S60
Brand: Fujitsu Pages: 99
Fujitsu PRIMERGY SX05 S1 User Manual preview
PRIMERGY SX05 S1
Brand: Fujitsu Pages: 52
Fujitsu PRIMERGY RX600 S5 Options Manual preview
PRIMERGY RX600 S5
Brand: Fujitsu Pages: 82
Fujitsu PRIMERGY ServerView Suite Manual preview
PRIMERGY ServerView Suite
Brand: Fujitsu Pages: 62
Fujitsu PRIMERGY RX800 S2 Operating Manual preview
PRIMERGY RX800 S2
Brand: Fujitsu Pages: 149

Brands by name

Popular brands

Load more brands