manualshive.com logo in svg

Lenovo ThinkServer RD450, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD450 is a powerful and reliable server designed for businesses. To ensure optimal performance, it is essential to have the User Manual and Hardware Maintenance Manual. Easily download these comprehensive manuals for free from our website, 88.208.23.73:8080, to optimize your server's functionality and maintenance.

Share
Download
background image

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• You can install an optical drive into the optical drive cage or the tape drive cage.

• Depending on the model, your server might look slightly different from the illustrations in this topic.

• Use any documentation that comes with the optical drive and follow those instructions in addition to

the instructions in this topic.

To install the optical drive, do the following:

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 65.

3. Remove the server cover. See “Removing the server cover” on page 65.

4. If you are installing the optical drive into the optical drive cage, remove the drive partition

2

. If you are

installing the optical drive into the tape drive cage, remove the drive partitions

1

and

2

. See “Removing

the drive partition” on page 158.

Figure 143. Removing the drive partitions

5. Touch the static-protective package that contains the optical drive cage or the tape drive cage to any

unpainted surface on the outside of the server. Then, take the optical drive cage or the tape drive
cage out of the package.

160

ThinkServer RD450 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD450



































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD450

IBM Enterprise Server S80 User Manual preview
Enterprise Server S80
Brand: IBM Pages: 282
Quantum NDX Series Installation Manual preview
NDX Series
Brand: Quantum Pages: 14
Xerox Legacy 4110 Print Options preview
Legacy 4110
Brand: Xerox Pages: 24
Xerox DocuColor 7000AP Release Notes preview
DocuColor 7000AP
Brand: Xerox Pages: 36
Basalte CORE PLUS Installation Manual preview
CORE PLUS
Brand: Basalte Pages: 2
IBM 88631SU - System x3850 - 8863 Installation Manual preview
88631SU - System x3850 - 8863
Brand: IBM Pages: 90
Quanta Computer STRATOS S400-X44E Technical Manual preview
STRATOS S400-X44E
Brand: Quanta Computer Pages: 251
Quatech WLNG-AN-DP500 Series Reference Manual preview
WLNG-AN-DP500 Series
Brand: Quatech Pages: 120
Acer AR380 F2 Specifications preview
AR380 F2
Brand: Acer Pages: 20
Acer AR385 F1 Specifications preview
AR385 F1
Brand: Acer Pages: 20
Acer AR360 F1 Series Specifications preview
AR360 F1 Series
Brand: Acer Pages: 20
Acer AR360 F2 Specifications preview
AR360 F2
Brand: Acer Pages: 18
Acer AR380 F1 Series Specifications preview
AR380 F1 Series
Brand: Acer Pages: 17
Acer Extensa 500 User Manual preview
Extensa 500
Brand: Acer Pages: 134
Acer AT350 F3 User Manual preview
AT350 F3
Brand: Acer Pages: 23
Acer AT350 F1 Series Specifications preview
AT350 F1 Series
Brand: Acer Pages: 23
Acer AW170h F1 User Manual preview
AW170h F1
Brand: Acer Pages: 160
Acer M19A System User Manual preview
M19A System
Brand: Acer Pages: 95

Brands by name

Popular brands

Load more brands