manualshive.com logo in svg

Lenovo ThinkServer RD450, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD450 is a powerful and reliable server designed for businesses. To ensure optimal performance, it is essential to have the User Manual and Hardware Maintenance Manual. Easily download these comprehensive manuals for free from our website, 88.208.23.73:8080, to optimize your server's functionality and maintenance.

Share
Download
background image

11. Do the following to connect the optical drive to your server:

a. Connect the connector

1

on one end of the cable to the rear of the optical drive.

1

Figure 148. Connecting the connector

1

on one end of the cable to the rear of the optical drive

b. Connect the 2-pin power connector on the other end of the cable to the 2-pin power connector on

the backplane. See “Backplane for up to eight 2.5-inch drives (with an AnyRAID-adapter slot)”
on page 39.

c. Connect the SATA connector on the other end of the cable to the appropriate SATA connector on the

system board. See “System board components” on page 41.

12. Save the removed optical drive dummy in case that you later remove the drive and need the dummy

to cover the drive bay.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation, go to “Completing the parts replacement” on page 178.

Replacing the optical drive

Attention:

Do not open your server or attempt any repair before reading and understanding “Safety information”

on page iii and “Guidelines” on page 63.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Depending on the model, your server might look slightly different from the illustrations in this topic.

• Use any documentation that comes with the optical drive and follow those instructions in addition to

the instructions in this topic.

To replace the optical drive, do the following:

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 65.

Chapter 6

.

Replacing hardware

163

Summary of Contents for ThinkServer RD450



































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD450

IBM i Series Handbook preview
i Series
Brand: IBM Pages: 908
IBM Flex System p270 Compute Node Installation And Service Manual preview
Flex System p270 Compute Node
Brand: IBM Pages: 510
B.E.G. LUXOMAT net ViSTATION Quick Start Manual preview
LUXOMAT net ViSTATION
Brand: B.E.G. Pages: 4
Galleon NTS-6001 Configuration Manual preview
NTS-6001
Brand: Galleon Pages: 47
Belkin F1UP0002 Quick Installation Manual preview
F1UP0002
Brand: Belkin Pages: 2
Obvius AcquiLite EMB A7810 Installation And Operation Manual preview
AcquiLite EMB A7810
Brand: Obvius Pages: 29
Obvius, LLC AcquiLite A7810-0 Installation And Operation Manual preview
AcquiLite A7810-0
Brand: Obvius, LLC Pages: 29
PalatiumCare Palcare PAL-211401 Install Manual preview
Palcare PAL-211401
Brand: PalatiumCare Pages: 64
Fujitsu PRIMERGY RX2520 M4 Operating Manual preview
PRIMERGY RX2520 M4
Brand: Fujitsu Pages: 92
Fujitsu Primergy RX200 S4 Operating Manual preview
Primergy RX200 S4
Brand: Fujitsu Pages: 127
Fujitsu PRIMERGY RX200 S3 Operating Manual preview
PRIMERGY RX200 S3
Brand: Fujitsu Pages: 100
Fujitsu PRIMERGY RX200 S6 Operating Manual preview
PRIMERGY RX200 S6
Brand: Fujitsu Pages: 126
Fujitsu PRIMERGY RX2510 M2 Operating Manual preview
PRIMERGY RX2510 M2
Brand: Fujitsu Pages: 74
Fujitsu PRIMERGY RX200 S5 Options Manual preview
PRIMERGY RX200 S5
Brand: Fujitsu Pages: 72
Fujitsu PRIMERGY RX2530 M4 Operating Manual preview
PRIMERGY RX2530 M4
Brand: Fujitsu Pages: 88
Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual preview
PRIMERGY RX2450 M1
Brand: Fujitsu Pages: 246
Fujitsu PRIMERGY RX2520 M5 Operating Manual preview
PRIMERGY RX2520 M5
Brand: Fujitsu Pages: 98
Fujitsu PRIMERGY RX1330 M4 Operating Manual preview
PRIMERGY RX1330 M4
Brand: Fujitsu Pages: 106

Brands by name

Popular brands

Load more brands