manualshive.com logo in svg

Lenovo ThinkServer RD450, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD450 is a powerful and reliable server designed for businesses. To ensure optimal performance, it is essential to have the User Manual and Hardware Maintenance Manual. Easily download these comprehensive manuals for free from our website, 88.208.23.73:8080, to optimize your server's functionality and maintenance.

Share
Download
background image

7. Locate the memory module that you want to remove and open the retaining clips on both ends of the

memory slot. Then, grasp the memory module by its edges and carefully pull it straight up to remove it
from the memory slot.

Figure 45. Removing a memory module

8. If you are instructed to return the old memory module, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 178.

Replacing the riser card

Attention:

Do not open your server or attempt any repair before reading and understanding “Safety information”

on page iii and “Guidelines” on page 63.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

The following procedure is based on the scenario that the riser card is installed on the riser card

bracket 1. The procedure is similar for riser card installed on the riser card bracket 2.

To replace the riser card, do the following:

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 65.

3. Remove the server cover. See “Removing the server cover” on page 65.

Chapter 6

.

Replacing hardware

81

Summary of Contents for ThinkServer RD450



































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD450

Hanwha WRR-5301 Replacement Manual preview
WRR-5301
Brand: Hanwha Pages: 3
IOGear GPSU21 Installation Manual preview
GPSU21
Brand: IOGear Pages: 48
Fusion FusionServer 2298 V5 Manual preview
FusionServer 2298 V5
Brand: Fusion Pages: 89
Fujitsu PRIMERGY SX940 Manual preview
PRIMERGY SX940
Brand: Fujitsu Pages: 44
Fujitsu PRIMERGY RX900 S2 Operating Manual preview
PRIMERGY RX900 S2
Brand: Fujitsu Pages: 114
Fujitsu PRIMERGY RX800 S2 Options Manual preview
PRIMERGY RX800 S2
Brand: Fujitsu Pages: 66
Fujitsu Primergy RX600 Start Manual preview
Primergy RX600
Brand: Fujitsu Pages: 8
Fujitsu PRIMERGY S60 Manual preview
PRIMERGY S60
Brand: Fujitsu Pages: 99
Fujitsu PRIMERGY SX05 S1 User Manual preview
PRIMERGY SX05 S1
Brand: Fujitsu Pages: 52
Fujitsu PRIMERGY RX600 S5 Options Manual preview
PRIMERGY RX600 S5
Brand: Fujitsu Pages: 82
Fujitsu PRIMERGY ServerView Suite Manual preview
PRIMERGY ServerView Suite
Brand: Fujitsu Pages: 62
Fujitsu PRIMERGY RX800 S2 Operating Manual preview
PRIMERGY RX800 S2
Brand: Fujitsu Pages: 149
Fujitsu PRIMERGY RX600 S6 Operating Manual preview
PRIMERGY RX600 S6
Brand: Fujitsu Pages: 134
Fujitsu PRIMERGY RX600 S6 Service Supplement Manual preview
PRIMERGY RX600 S6
Brand: Fujitsu Pages: 62
Fujitsu Primergy RX600 S2 Operating Manual preview
Primergy RX600 S2
Brand: Fujitsu Pages: 121
Fujitsu PRIMERGY RX500 S7 Operating Manual preview
PRIMERGY RX500 S7
Brand: Fujitsu Pages: 88
Fujitsu PRIMERGY RX600 S3 User Manual preview
PRIMERGY RX600 S3
Brand: Fujitsu Pages: 305
Fujitsu PRIMERGY RX600 S3 Operating Manual preview
PRIMERGY RX600 S3
Brand: Fujitsu Pages: 119

Brands by name

Popular brands

Load more brands