manualshive.com logo in svg

Lenovo ThinkServer RD640, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD640 is a powerful and reliable server designed for efficient business operations. To effectively utilize and maintain this innovative hardware, make sure to download the comprehensive User Manual and Hardware Maintenance Manual, available for free download at 88.208.23.73:8080.

Share
Download
background image

• Diagnostic solutions

• Product and service warranty

• Product and parts details

• User guides and manuals

• Knowledge base and frequently asked questions

Help and service

This topic contains information about obtaining help and service.

Before you call

Before you call, do the following to try to solve the problem by yourself:

• Check all cables to ensure that they are connected.

• Check the power switches to ensure that the system and optional devices are turned on.

• Use the troubleshooting information in your system documentation on the documentation DVD that

comes with your product.

• Check for the updated information, new device drivers, and hints and tips on the Lenovo Support Web

site at:
http://www.lenovo.com/support

• Download the diagnostic program from the Lenovo Web site, and then run it. See “Lenovo ThinkServer

Diagnostics” on page 14.

If possible, be at your product when you call. Have the following information available:

• Machine type and model

• Serial numbers of your Lenovo hardware products

• Description of the problem

• Exact wording of any error messages

• Hardware and software configuration information

Calling for service

During the warranty period, you can get help and information by telephone through the Customer Support
Center.

The following services are available during the warranty period:

•

Problem determination

- Trained service personnel are available to assist you with determining a

hardware problem and deciding what action is necessary to fix the problem.

•

Hardware repair

- If the problem is caused by hardware under warranty, trained service personnel are

available to provide the applicable level of service.

•

Engineering Change management

- There might be changes that are required after a product has

been sold. Lenovo or your reseller will make selected Engineering Changes (ECs) that apply to your
hardware available.

196

ThinkServer RD640 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD640







































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD640

Supermicro SuperServer E100-8Q User Manual preview
SuperServer E100-8Q
Brand: Supermicro Pages: 48
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
Zenith z-server lt User Manual preview
z-server lt
Brand: Zenith Pages: 218
xFusion Digital Technologies FusionServer 5288 V6 Manual preview
FusionServer 5288 V6
Brand: xFusion Digital Technologies Pages: 131
IBM 88861TU Installation And User Manual preview
88861TU
Brand: IBM Pages: 82
Autonomic Mirage MMS-1e Setup Manual preview
Mirage MMS-1e
Brand: Autonomic Pages: 17
Supermicro SUPERSERVER 6015C-NT User Manual preview
SUPERSERVER 6015C-NT
Brand: Supermicro Pages: 110
IBM 8678 Installation And User Manual preview
8678
Brand: IBM Pages: 96
Kontron Embedded Computers PxV206 User Manual preview
PxV206
Brand: Kontron Embedded Computers Pages: 46
Asus RS520-X5 PS8 User Manual preview
RS520-X5 PS8
Brand: Asus Pages: 150
Asus RS300-E6 Series User Manual preview
RS300-E6 Series
Brand: Asus Pages: 162
Asus RS161-E5 - 0 MB RAM Service Manual preview
RS161-E5 - 0 MB RAM
Brand: Asus Pages: 124
Asus RS161-E4 PA2 User Manual preview
RS161-E4 PA2
Brand: Asus Pages: 126
Asus RS700-X7/PS4 User Manual preview
RS700-X7/PS4
Brand: Asus Pages: 182
Asus RS162-E4 RX4 User Manual preview
RS162-E4 RX4
Brand: Asus Pages: 164
Asus RS400-E8-PS2 User Manual preview
RS400-E8-PS2
Brand: Asus Pages: 178
Asus RS120-E4 - 0 MB RAM User Manual preview
RS120-E4 - 0 MB RAM
Brand: Asus Pages: 174
Asus RS260-E3 Service Manual preview
RS260-E3
Brand: Asus Pages: 176

Brands by name

Popular brands

Load more brands