manualshive.com logo in svg

Lenovo ThinkServer RD640, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD640 is a powerful and reliable server designed for efficient business operations. To effectively utilize and maintain this innovative hardware, make sure to download the comprehensive User Manual and Hardware Maintenance Manual, available for free download at 88.208.23.73:8080.

Share
Download
background image

RAID configuration utilities

Your server has a RAID card installed, which works with some configuration utilities to support hardware
RAID. For detailed information, see “Configuring RAID” on page 70.

Remote management software

The integrated TMM provides basic remote management features for the server. The add-on TMM Premium
option provides advanced remote management features for the server.

For detailed information about the remote management software and server remote management, refer to
the

ThinkServer Management Module User Guide

, which is available for download at:

http://www.lenovo.com/UserManuals

ThinkServer EasyStartup

The ThinkServer EasyStartup program simplifies the process of configuring RAID and installing supported
Microsoft Windows and Linux operating systems and device drivers on your server. This program is provided
with your server on a self-starting (bootable)

ThinkServer EasyStartup

DVD. The user guide for the program

also is on the DVD and can be accessed directly from the program interface. For detailed information, see
“Using the ThinkServer EasyStartup program” on page 67.

ThinkServer EasyUpdate Firmware Updater

The ThinkServer EasyUpdate Firmware Updater program (hereinafter referred to as the Firmware Updater
program) enables you to maintain your server firmware up-to-date and helps you avoid unnecessary server
outages. The Firmware Updater program is provided on the Lenovo Support Web site. For more information
about downloading and using the Firmware Updater program, see “Updating the firmware” on page 73.

ThinkServer Smart Grid Technology

The ThinkServer Smart Grid Technology program helps administrators to monitor and manage server
performance, especially the power consumption for groups of servers equipped with the Intel Intelligent
Power Node Manager technology.

Lenovo provides a trial version of the ThinkServer Smart Grid Technology program with a free 90-day
subscription. After 90 days, you must renew the license to continue using the program. You can purchase
the license from Lenovo to activate the ThinkServer Smart Grid Technology program and expand the
management capability of the program when the free trial ends.

To download the ThinkServer Smart Grid Technology program, go to http://www.lenovo.com/drivers and
follow the instructions on the Web page.

For detailed information about using the ThinkServer Smart Grid Technology program, refer to the help
system of the program.

Lenovo ThinkServer Diagnostics

The Lenovo ThinkServer Diagnostics program enables you to diagnose server problems, perform some
diagnostic tests, and collect system information. Examples of the system information include basic
operating-system information, hardware information, SEL, RAID log, and so on. Depending on the model,
your server might come with one of the following diagnostic programs:

• Lenovo ThinkServer Diagnostics Linux Edition

• Lenovo ThinkServer Diagnostics Standalone Edition

• Lenovo ThinkServer Diagnostics Windows Edition

14

ThinkServer RD640 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD640







































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD640

Obvius AcquiLite EMB Installation And Operation Manual preview
AcquiLite EMB
Brand: Obvius Pages: 29
N-Tron ESERV-11T User Manual preview
ESERV-11T
Brand: N-Tron Pages: 55
IBM 87401RU Installation And User Manual preview
87401RU
Brand: IBM Pages: 110
SafeNet ProtectServer External 2 Installation Manual preview
ProtectServer External 2
Brand: SafeNet Pages: 22
Cabletron Systems CSMIM2-16 Installation Manual preview
CSMIM2-16
Brand: Cabletron Systems Pages: 100
Olive O3HD Quick Start Manual preview
O3HD
Brand: Olive Pages: 103
Leightronix UltraNEXUS HD Blade Product Quick Manual preview
UltraNEXUS HD Blade
Brand: Leightronix Pages: 5
IBM xSeries 342 2RX Maintenance Manual preview
xSeries 342 2RX
Brand: IBM Pages: 158
AIC SB101-LB User Manual preview
SB101-LB
Brand: AIC Pages: 86
AIC SB402-LB User Manual preview
SB402-LB
Brand: AIC Pages: 97
AIC SB151-LB User Manual preview
SB151-LB
Brand: AIC Pages: 81
Bosanova XTC-600 Specifications preview
XTC-600
Brand: Bosanova Pages: 2
Bosanova RBT-366 Specifications preview
RBT-366
Brand: Bosanova Pages: 2
Gigabyte G481-HA0-00 Assembly Notice preview
G481-HA0-00
Brand: Gigabyte Pages: 21
Meinberg IMS LANTIME M4000 Manual preview
IMS LANTIME M4000
Brand: Meinberg Pages: 138
Inventec N800G3 User Manual preview
N800G3
Brand: Inventec Pages: 258
VBrick Systems EtherneTV-NXG 1 Quick Start Manual preview
EtherneTV-NXG 1
Brand: VBrick Systems Pages: 21
Iomega P400u - 32371 NAS 7200 RPM 160 GB Server Setup Manual preview
P400u - 32371 NAS 7200 RPM 160 GB Server
Brand: Iomega Pages: 2

Brands by name

Popular brands

Load more brands