Lenovo ThinkServer TD330 Manual Download

Page: 72 / 218

2. On the

Security

menu, select

Administrator Password

to set an administrator password or select

User Password

to set a user password.

3. See “Password considerations” on page 57. Then, follow the instructions on the screen to set or

change a password.

4. If you want to delete a password, type your current password. Press Enter when you are prompted

to type a new password. Then, press Enter to confirm the new password. The previous password
will be cleared.

Note:

For security reasons, it is recommended that you always set a password for your server.

5. Press F10 to save settings and exit the Setup Utility program.

If you have forgotten the password, you can use the Clear CMOS jumper on the system board to erase the
password. See “System board jumpers and TMM status LED” on page 46. Then, set a new password for
the server.

Selecting a startup device

If your server does not start up from a desired device such as the disc or hard disk drive as expected, do one
of the following to select the startup device you want.

Note:

Not all discs, hard disk drives, or other removable devices are bootable.

• To select a temporary startup device, do the following:

Note:

Selecting a startup device using the following method does not permanently change the startup

sequence.

1. Turn on or restart your server.

2. When you see the logo screen, press F10 if your server is connected to a network and you want to

start up the server from the network. Otherwise, press F12 to display the boot menu. The boot
device selection window opens.

3. In the boot device selection window, use the up and down arrow keys on the keyboard to switch

between the selections. Press Enter to select the device of your choice. Then, the server will start
up from the selected device.

• To view or permanently change the configured startup device sequence, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 53.

2. On the

Boot Options

menu, follow the instructions on the screen to set the startup device for

Boot

Option #1

Boot Option #5

depending on your needs. You also can set the boot priority for various

devices. See “Boot Options menu” on page 56.

3. Press F10 to save settings and exit the Setup Utility program. The server will follow the startup device

sequence you have set each time you turn on the server.

Configuring the TPM function

The TPM works as a hardware security solution to help you to encrypt data and protect the server. The TPM
function is only available when there is a TPM installed in your server. See “Installing the ThinkServer Trusted
Platform Module” on page 113. You can purchase a TPM from Lenovo.

After installing a TPM, you need to check if the TPM function is enabled in the Setup Utility program.

To enable the TPM function in the Setup Utility program, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 53.

2. On the

Security

menu, select

TPM/TCM

➙

TPM Support

. Ensure that

TPM Support

is set to