manualshive.com logo in svg

Lenovo ThinkServer TD330, Manual

The Lenovo ThinkServer TD330 is an advanced and reliable server designed for optimal performance. Unlock the full potential of this exceptional product by accessing its user manual, available for free download on our website. Explore its features, capabilities, and maintenance instructions in detail to maximize your server experience.

Share
Download
background image

insert the

ThinkServer EasyStartup

DVD into the optical drive. The installation packages for the programs

are located in the Utilities and Others folder in the root directory of the DVD. The

ThinkServer EasyStartup

DVD is designed for different types of servers and the Utilities and Others folder might contain additional
installation packages that are not required to be installed on your server.

Configuring the ThinkServer RAID 100 or RAID 300

The ThinkServer RAID 100 or RAID 300 (also known as onboard SATA/SAS software RAID) is integrated in
the PCH on the system board. If you connect the signal cables from the system board to the hard disk drives
or backplane, you can configure RAID for the hard disk drives using the LSI Software RAID Configuration
Utility program, independently of the operating system. The ThinkServer RAID 100 or RAID 300 supports
RAID levels 0, 1, and 10 by default. You also can activate RAID 5 by installing a ThinkServer RAID 100 or
RAID 300 Upgrade Key for Advanced RAID. See “Installing or removing the ThinkServer RAID 100 or RAID
300 upgrade key for Advanced RAID” on page 106.

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID
controller in an operating system environment.

Before configuring RAID for your server, observe the following precautions:

• Use hard disk drives that are of the same type (SATA or SAS) and have the same capacity within a

single RAID array.

• The total drive capacity of the primary RAID array is limited to 2 TB.

RAID array status

When you turn on the server, the RAID controller ROM version, the RAID array status, and the list of available
hard disk drives will be displayed during the POST.

The RAID array status can be one of the following:

•

Online

This is the normal status, which indicates that the RAID array is working correctly.

•

Degrade

This status indicates that more than one hard disk drive in the RAID array cannot be synchronized or have
failed. You need to replace the failing hard disk drives and rebuild the data. See “Installing or replacing a
hot-swap hard disk drive” on page 124 and “Rebuilding a physical drive” on page 69.

•

Offline

This status indicates that the RAID array has failed and cannot be rebuilt. You need to create a new RAID
array. See “Creating, adding, or deleting a RAID array” on page 68.

Starting the LSI Software RAID Configuration Utility program

This topic provides instructions on how to start the LSI Software RAID Configuration Utility program.

To start the LSI Software RAID Configuration Utility program, do the following:

1. Turn on the server.

2. During the POST, when you see the message “Press Ctrl-M or Enter to run LSI Software RAID Setup

Utility,” immediately press Ctrl+M to start the LSI Software RAID Configuration Utility program.

LSI Software RAID Configuration Utility program interface

This topic provides information about the menus and items in the LSI Software RAID Configuration Utility
program. Depending on the version of the program, some menu or item information might differ slightly from
the information in this topic.

66

ThinkServer TD330 Hardware Maintenance Manual

Summary of Contents for ThinkServer TD330



























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD330

IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual preview
8649 - Eserver xSeries 225
Brand: IBM Pages: 194
Radware APSolute Vision Installation And Maintenance Manual preview
APSolute Vision
Brand: Radware Pages: 81
Hawking HMPS2U User Manual preview
HMPS2U
Brand: Hawking Pages: 40
IBM Netfinity 1000-8477 21Y Hardware Maintenance Manual preview
Netfinity 1000-8477 21Y
Brand: IBM Pages: 268
Lantronix xPico XPW100A003-01-B Integration Manual preview
xPico XPW100A003-01-B
Brand: Lantronix Pages: 54
Supermicro SuperServer 1029P-MT User Manual preview
SuperServer 1029P-MT
Brand: Supermicro Pages: 123
LaCie 301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard... User Manual preview
301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...
Brand: LaCie Pages: 74
Digi 70002405 User Manual preview
70002405
Brand: Digi Pages: 163
Brother RuggedJet RJ-4040 Software Manual preview
RuggedJet RJ-4040
Brand: Brother Pages: 111
Brother HL-7050 Series User Manual preview
HL-7050 Series
Brand: Brother Pages: 253
NAIM NS01 Reference Manual preview
NS01
Brand: NAIM Pages: 20
Zte ZXCLOUD R5300 G3 Maintenance Manual preview
ZXCLOUD R5300 G3
Brand: Zte Pages: 19
Gigabyte G242-Z12 User Manual preview
G242-Z12
Brand: Gigabyte Pages: 141
Gigabyte E152-ZE0 User Manual preview
E152-ZE0
Brand: Gigabyte Pages: 138
Telecom Behnke 20-9612A Instructions Manual preview
20-9612A
Brand: Telecom Behnke Pages: 80
Check Point Integrity Installation Manual preview
Integrity
Brand: Check Point Pages: 53
IBM 72332SU Brochure & Specs preview
72332SU
Brand: IBM Pages: 4
Dell EMC PowerEdge C6525 Installation And Service Manual preview
PowerEdge C6525
Brand: Dell EMC Pages: 99

Brands by name

Popular brands

Load more brands