manualshive.com logo in svg

Lenovo ThinkServer TD330, Manual

The Lenovo ThinkServer TD330 is an advanced and reliable server designed for optimal performance. Unlock the full potential of this exceptional product by accessing its user manual, available for free download on our website. Explore its features, capabilities, and maintenance instructions in detail to maximize your server experience.

Share
Download
background image

Table 1. LSI Software RAID Configuration Utility program menu items (continued)

Menu item

Submenu item

Comments

Adapter

Set adapter-related parameters, such
as rebuild rate, consistency check rate,
and so on.

Virtual Drive

Set virtual drive parameters.

Objects

Physical Drive

Set physical drive parameters, such as
creating a hot-spare drive for the virtual
drive, making a failing drive as online,
changing a drive state, and viewing the
specifications of a physical drive.

Rebuild

Varies by configuration.

Rebuild physical drives.

Check Consistency

Varies by configuration.

Check consistency of virtual drives.

Creating, adding, or deleting a RAID array

This topic provides instructions on how to create, add, or delete a RAID array using the LSI Software RAID
Configuration Utility program.

Note:

Before you create a RAID array using the LSI Software RAID Configuration Utility program, ensure that

the server meets the required hardware configuration. For example, the server needs to have the required
number of hard disk drives installed and connected to the system board. See “About RAID” on page 64 for
information about the required number of hard disk drives for each RAID level. If you want to create a RAID 5
array using the LSI Software RAID Configuration Utility program, the server also needs to have a ThinkServer
RAID 100 or RAID 300 Upgrade Key for Advanced RAID. See “Installing or removing the ThinkServer RAID
100 or RAID 300 upgrade key for Advanced RAID” on page 106.

To create, add, or delete a RAID array using the LSI Software RAID Configuration Utility program, do the
following:

1. Start the LSI Software RAID Configuration Utility program. See “Starting the LSI Software RAID

Configuration Utility program” on page 66.

2. On the main interface of the program, do one of the following depending on your needs:

• If you want to create a RAID array, select

Easy Configuration

, and then follow the instructions on

the screen.

• If you want to add a secondary RAID array (if supported by your server), select

View/Add

Configuration

, and then follow the instructions on the screen to view the current configuration

and add a new RAID array.

• If you want to delete the existing RAID array, exit the program and back up all your data on the

hard disk drives. After backing up all your data, enter the program main interface and select

Clear

Configuration

. Select

Yes

when prompted and follow the instructions on the screen.

Attention:

Deleting an existing RAID array erases all data on the array. Ensure that you back up all

data before deleting the RAID array. If the operating system is installed on the RAID array you want to
delete, you need to reinstall the operating system after deleting the RAID array.

• If you want to delete the existing RAID array and create a new RAID array, exit the program and back

up all your data on the hard disk drives. After backing up all your data, enter the program main
interface and select

New Configuration

. Select

Yes

when prompted to proceed, and then follow the

instructions on the screen.

Attention:

Deleting an existing RAID array erases all data on the array. Ensure that you back up all

data before deleting the RAID array. If the operating system is installed on the RAID array you want to
delete, you need to reinstall the operating system after deleting the RAID array.

68

ThinkServer TD330 Hardware Maintenance Manual

Summary of Contents for ThinkServer TD330



























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD330

360 Systems V2000 Series Operation Manual preview
V2000 Series
Brand: 360 Systems Pages: 117
Obvius AcquiLite EMB Installation And Operation Manual preview
AcquiLite EMB
Brand: Obvius Pages: 29
IBM pSeries 670 Installation Manual preview
pSeries 670
Brand: IBM Pages: 128
B.E.G. LUXOMAT net ViSTATION Quick Start Manual preview
LUXOMAT net ViSTATION
Brand: B.E.G. Pages: 4
LOOQS MB202 User Manual preview
MB202
Brand: LOOQS Pages: 69
PCI Mini-101M User Manual preview
Mini-101M
Brand: PCI Pages: 87
Alcatel OmniPCX Quick Start Manual preview
OmniPCX
Brand: Alcatel Pages: 2
Axis Video Server 242S IV Specifications preview
Video Server 242S IV
Brand: Axis Pages: 2
Axis 242 User Manual preview
242
Brand: Axis Pages: 73
Axis 200+ User Manual preview
200+
Brand: Axis Pages: 122
Vitek VT-IPSD102H - Brochure preview
VT-IPSD102H -
Brand: Vitek Pages: 2
Lantronix LPS1-T User Manual preview
LPS1-T
Brand: Lantronix Pages: 78
VC 12544-SF Mounting And Operating Manual preview
12544-SF
Brand: VC Pages: 100
Camerio RX3616_V2 User Manual preview
RX3616_V2
Brand: Camerio Pages: 178
Optibase MGW 2400 User Manual preview
MGW 2400
Brand: Optibase Pages: 156
Dell EMC PowerEdge C6420 Manual preview
PowerEdge C6420
Brand: Dell EMC Pages: 53
Dell EMC PowerEdge M640 Installation And Service Manual preview
PowerEdge M640
Brand: Dell EMC Pages: 110
Dell EMC PowerEdge FC430 Owner'S Manual preview
PowerEdge FC430
Brand: Dell EMC Pages: 117

Brands by name

Popular brands

Load more brands