1. Download the driver from the Lenovo Support Web site. The most up-to-date device drivers for various
server models are always available on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Double-click the EXE file to unzip it to a folder. Copy the folder to a USB storage device and connect
the USB storage device to your server.
3. Log in to the operating system and copy the folder from the USB storage device to your server.
4. Double-click the driver, and then click
Next
.
5. In the “Ready to Install the Program” window, click
Install
. The installation begins.
6. In the “InstallShied Wizard Completed” window, click
Finish
to restart your server.
Installing the driver for an Ethernet card
To install the driver for an Ethernet card, do the following:
1. Download the driver from the Lenovo Support Web site. The most up-to-date device drivers for various
server models are always available on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Double-click the EXE file to unzip it to a folder. Copy the folder to a USB storage device and connect
the USB storage device to your server.
3. Log in to the operating system and copy the folder from the USB storage device to your server.
4. In the Device Manager window, right-click the Ethernet card. Then, select
Update Driver Software
.
5. Click
Browse
to locate the driver, and then click
OK
➙
Next
. The installation begins.
6. Click
Close
. The installation is completed.
Installing the driver for an HBA card
To install the driver for an HBA card, do the following:
1. Download the driver from the Lenovo Support Web site. The most up-to-date device drivers for various
server models are always available on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Double-click the EXE file to unzip it to a folder. Copy the folder to a USB storage device and connect
the USB storage device to your server.
3. Log in to the operating system and copy the folder from the USB storage device to your server.
4. Do one of the following:
• For LPe16002B HBA cards:
a. Double-click the driver, and then click
Next
.
b. In the Installation options window, configure the settings and click
Finish
.
Note:
The following steps are based on the scenario that
Start AutoPilot Installer
is selected in
this step.
c. Click
Next
➙
Next
.
d. Click
Finish
. The installation is completed.
• For Qlogic, QLE2672, and LSI 9300-8e HBA cards:
a. In the Device Manager window, right-click the HBA card. Then, select
Update Driver Software
.
b. Click
Browse
to locate the driver, and then click
OK
➙
Next
. The installation begins.
Note:
If prompted, select
Always trust software from Qlogic Corporation
. Then, click
Install
.
c. Click
Close
. The installation is completed.
18
ThinkServer TD340 Operating System Installation Guide
Summary of Contents for ThinkServer TD340
