Installing the driver for an Ethernet card
Note:
Before installing the driver for an Ethernet card, ensure that the kernel-source package and the
corresponding compiler are installed on your server.
To install the driver for an Ethernet card, do the following:
1. Copy the Ethernet card driver from the
ThinkServer EasyStartup
DVD to your local drive. Double-click
the EXE file to unzip it to a folder. Copy the folder to a USB storage device and connect the USB
storage device to your server.
2. Log in to the operating system and copy the folder from the USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd e1000e
./install
Note:
In the command lines,
e1000e
represents the name of the driver file. Use the corresponding file
name on your server.
4. Restart your server and click
Computer
on the bottom-left corner.
5. Click
YaST
.
6. In the YaST Control Center window, click
Network Devices
. Then, double-click
Network Card
.
7. In the Network Setup Method window, select
User Controlled with NetworkManager
and click
Next
.
8. Select an the Ethernet card you need and click
Edit
.
9. In the Network Address Setup window, select
Static Address Setup
and configure the settings. Then,
click
Next
.
10. Configure other Ethernet cards if needed. Click
Finish
to complete the Ethernet card configuration.
Installing the driver for an onboard graphics card
To install the driver for an onboard graphics card, do the following:
1. Copy the onboard graphics card driver from the
ThinkServer EasyStartup
DVD to your local drive.
Double-click the EXE file to unzip it to a folder. Copy the folder to a USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from the USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
rpm –ivh xorg69-0.96-0.i386.rpm - -force
Note:
In the command lines,
xorg69-0.96-0.i386.rpm
represents the name of the folder where the driver
is stored. Use the corresponding file name on your server.
4. Restart your server.
Installing the driver for a discrete graphics card
To install the driver for a discrete graphics card, do the following:
1. Download the driver for the discrete graphics card from the Lenovo Support Web site. Then, copy the
driver to a USB storage device and connect the USB storage device to your server.
Notes:
48
ThinkServer TD340 Operating System Installation Guide
Summary of Contents for ThinkServer TD340
