62
Installation
2.
The unpacking sequence pertaining to 2U enclosures is shown in
.
Figure 51 Unpacking the 2U12 and 2U24 enclosures
2U enclosures are supplied with the midplane PCB and all plug-in modules installed. For information about
plug-in module replacement, see
Module removal and replacement
. Dummy drive carriers must be installed in
unused drive slots.
3.
The unpacking procedure pertaining to the 5U84 is shown in
.
CAUTION:
The enclosure does not include DDICs, but all rear panel modules are installed. This
partially-populated enclosure is quite heavy: 64 kg (142 lb). Verify that each strap is securely wrapped and
buckled. Four people are required to lift the 5U84 from the box.
Figure 52 Unpacking the 5U84 enclosure