25
7.
Unscrew the screws of PCI cage and remove the cage.
PCI Cage Removal
To reinstall, reverse the steps above.
Special Note: Refer to the table below for the specifications and the assigned slots for PCIe cards supported by HR630X.
Slot no.
Supported size
Slot specifications
Remark
1
Half-height,
×
8
Support 1xCPU config
Half-length
2
Half-height/,
×
16
Support 1xCPU config
Full-height half-length
3
Half-height,
×
16
Support 2xCPU config
half-length
2.2.11
INSTALLING
OR
REMOVING
THE
REAR
HDD
MODULE
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
To remove rear HDD module assembly, do the following:
1.
Turn off all attached devices and the server.
PCIe
Card
Removal
–
type
1
PCIe
Card
Removal
– type
2
PCIe
Card
Removal
–
type
3
