CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
If you are installing an optional LOM adapter in slot 9, install it before installing the riser bracket for slots 14
and 15. See “Install a LOM adapter in slot 9” on page 65.
Before you install the optional riser bracket for slots 14 and 15:
1. If the I/O tray is installed in the server, remove it. See “Remove the I/O tray” on page 152.
2. Remove the riser for slots 10 through 15 (right riser). See “Remove the riser for slots 10 through 15 (right
3. Make sure that there is no filler installed on the I/O tray for slots 14 and 15.
Complete the following steps to install the riser bracket.
Watch the procedure
. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DbSYJFY74PoKmph7vgrkKH&playnext=1
• Youku:
http://list.youku.com/albumlist/show/id_50952215
Figure 43. Riser bracket installation (slots 14 and 15)
Step 1. Align the slots on the riser bracket with the pins on the riser and slide it in place; then, press the
bracket onto the riser until the retaining clips engage.
After installing the optional riser bracket for slots 14 and 15:
1. Install adapters in the riser. See “Install a PCIe adapter in slots 10 through 15” on page 69.
2. If any of the adapters in the riser have internal cables, make sure that they are connected before
installing the riser in the I/O tray.
3. Install the riser in the I/O tray. See “Install the riser for slots 10 through 15 (right riser)” on page 177.
4. If you have no other options to install in the I/O tray after installing the riser, install the I/O tray in the
chassis. See “Install the I/O tray” on page 153.
Install the riser for slots 16 and 17
The riser for adapter slots 16 and 17 is in the I/O tray that is accessed from the rear of the server. After
installing adapters in the riser, insert the riser in the I/O tray and secure it with the captive screw.
78
ThinkSystem SR950 Setup Guide
Summary of Contents for ThinkSystem SR950 7X11
