Lenovo ThinkSystem SR950 Setup Manual Download | Manualshive

Page: 18 / 390

background image

•  “Four-socket performance / storage rich, two processors” on page 14
•  “Four-socket performance / storage rich, three processors” on page 14
•  “Four-socket performance / storage rich, four processors” on page 15

Notes:

•  5100 series processors are only supported in four-processor configuration in this category.
•  For optimal performance, configure four processors in mesh topology.
•  These configuration require the upper storage tray, and could be upgraded to eight-socket ones, but it

requires the 4S-to-8S Upgrade Option kit, additional components, and Lenovo hardware installation.
Consider “Four-socket upgradable” on page 15 or “Four-socket upgradable / storage rich” on page 17 for
an easier potential upgrade in the future.

For more information about upgrading to the eight-socket configuration, see the following topic:

http://thinksystem.lenovofiles.com/help/topic/7X12/installing_the_4S-to-8S_upgrade_option.html

Four-socket performance / storage rich, two processors

This configuration comes with two processors, requires at least one 1100/1600-watt PSU, and supports up
to:
• 24 memory modules.
• five rear PCIe slots.

See the following tables for the location of the supported components.

Table 10. Location of the two processors and 24 supported memory module slots (viewed from the front)

Upper tray filler

Not populated

Not populated

CPU 1 and DIMM 1-12

CPU 2 and DIMM 13-24

Table 11. Location of the five supported PCIe slots (viewed from the rear)

PCIe 5

PCIe 6

PCIe 7

PCIe 8
(ML2)

PCIe 9
(LOM)

Four-socket performance / storage rich, three processors

This configuration comes with three processors, requires at least two 1100/1600-watt PSUs, and supports
up to:
• 36 memory modules.
• nine rear PCIe slots.

This configuration comes with three processors, requires nine fans, and supports up to:

See the following tables for the location of the supported components.

14

ThinkSystem SR950 Setup Guide

«
...
16
17
18
19
20
...
»

Summary of Contents for ThinkSystem SR950







































































































































































































































































































































































































Reviews:

No comments

Related manuals for ThinkSystem SR950

Z10 BUISNESS CLASS Z10 BC

Brand: IBM Pages: 67

x3450 - System - 7948

Brand: IBM Pages: 2

Brand: Omneon Pages: 2

Brand: Kontron Pages: 110

eServer BladeCenter HS40 Type 8839

Brand: IBM Pages: 120

UniServer T1100 G3

Brand: H3C Pages: 138

Brand: Sollae Systems Pages: 45

ProtectServer External 2

Brand: SafeNet Pages: 22

Brand: QNAP Pages: 53

Brand: XtendLan Pages: 34

Brand: XtendLan Pages: 51

Multi-Port Fast Ethernet Print Server FPS-3121

Brand: Planet Pages: 57

Linux Virtual Server

Brand: Red Hat Pages: 82

Brand: R.V.R. Elettronica SpA Pages: 128

Brand: Silicon Graphics International Pages: 68

Brand: Silicon Graphics Pages: 116

Brand: Check Point Pages: 41

ProtectServer 3 HSM

Brand: Thales Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands