Lenovo ThinkSystem SR950 Setup Manual Download | Manualshive

Page: 251 / 390

background image

• The server supports the following power supply configurations:

–  For two processor server configurations, one or more 1600-watt or 1100-watt power supplies.
–  For four processor server configurations, two or more 1600-watt or 1100-watt power supplies.
–  For eight processor server configurations, two or more 1600-watt or four 1100-watt power supplies

Attempting to operate the server with an unsupported power configuration results in an “unsupported
configuration” message in the system event log and on the system front panel

• Power supplies can be installed in any power supply bay and populated in any order. Redundancy differs

depending on how many processors are installed, the number of power supplies that are required to keep
the system operating, which power supply bays are populated, and the number of input power sources.

Notes:

– For power source redundancy, the power supplies in bays 1 and 3 must be fed from a different power

source than the power supplies in bays 2 and 4.

– Use the Lenovo Capacity Planner to calculate the required power capacity for what is configured for

your server. More information about the Lenovo Capacity Planner is available at:

datacentersupport.lenovo.com/solutions/lnvo-lcp

Before you install a power supply:

1. If the power supply bay contains a filler, pull the filler from the bay.

Complete the following steps to install a power supply:

Watch the procedure

. A video of the installation process is available:

•

•

Step 1. Install the power supply in the bay.

Figure 51. Power supply installation

Insert the power supply in its bay and press it in until the release tab locks.

After you have installed a power supply:

1. If the power supplies being installed are of a different wattage than the power supplies previously

installed in the chassis, cover the existing chassis power rating label with a new label of the same style
from the system power rating labels sheet that comes with the power supply option.

2. Route the power cable from the power supply to the power source and secure it.

Server hardware setup

247

«
...
249
250
251
252
253
...
»

Summary of Contents for ThinkSystem SR950







































































































































































































































































































































































































Reviews:

No comments

Related manuals for ThinkSystem SR950

Brand: IBM Pages: 180

Express5800/R310e-E4

Brand: NEC Pages: 86

NEAX2000 IVS Series

Brand: NEC Pages: 160

Brand: Synology Pages: 15

eServer 342 xSeries

Brand: IBM Pages: 70

SUPERSERVER 6027TR-H71FRF

Brand: Supero Pages: 118

Brand: AIC Pages: 101

BladeCenter PS703

Brand: IBM Pages: 198

Brand: TYAN Pages: 81

Brand: Dell Pages: 77

Brand: Dell Pages: 14

Brand: Dell Pages: 116

PowerEdge FC430

Brand: Dell Pages: 102

Brand: Dell Pages: 188

Brand: Dell Pages: 16

Brand: Dell Pages: 66

Brand: Dell Pages: 160

Brand: Dell Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands