Select this option to view the following details concerning each of the installed DCPMMs:
– Firmware version
– Configuration status
– Raw capacity
– Memory capacity
– App Direct capacity
– Unconfigured capacity
– Inaccessible capacity
– Reserved capacity
– Percentage remaining
– Security state
Alternatively, view DCPMM details with the following command in OneCLI:
onecli.exe config show IntelOptaneDCPMM
--imm USERID:PASSW0RD@10.104.195.86
Notes:
–
USERID
stands for XCC user ID.
–
PASSW0RD
stands for XCC user password.
–
10.104.195.86
stands for IP address.
•
Goals
–
Memory Mode [%]
Select this option to define the percentage of DCPMM capacity that is invested in system memory, and
hence decide the DCPMM mode:
–
0%:
App Direct Mode
–
1-99%:
Mixed Memory Mode
–
100%:
Memory Mode
Go to
Goals
➙
Memory Mode [%]
, input the memory percentage, and reboot the system.
Notes:
– Before changing from one mode to another:
1. Back up all the data and delete all the created namespaces. Go to
Namespaces
➙
View/
Modify/Delete Namespaces
to delete the created namespaces.
2. Perform secure erase on all the installed DCPMMs. Go to
Security
➙
Press to Secure Erase
to
perform secure erase.
– Make sure the capacity of installed DCPMMs and DRAM DIMMs meets system requirements for the
new mode (see “DCPMM installation order” on page 176).
– After the system is rebooted and the input goal value is applied, the displayed value in
System
Configuration and Boot Management
➙
Intel Optane DCPMMs
➙
Goals
will go back to the
following default selectable options:
•
Scope:
[Platform]
•
Memory Mode [%]:
0
•
Persistent Memory Type:
[App Direct]
These values are selectable options for DCPMM settings, and do not represent the current DCPMM
status.
In addition, you can take advantage of a memory configurator, which is available at the following site:
http://1config.lenovo.com/#/memory_configuration
Alternatively, set DCPMM Goals with the following commands in OneCLI:
.
263
Summary of Contents for ThinkSystem SR950
