CAUTION:
To avoid personal injury, disconnect the fan cables before removing the fan from the device.
S002
CAUTION:
Make sure all power cords are disconnected from system when reading in this manual and the
following step is required to complete: Disconnect the power cords and all external cables from the
rear of the enclosure.
Remove a front fan
Use this information to remove a front fan.
Ground package before opening”
Before removing a front fan:
1. If the server is installed in a rack, extend the server from the rack.
2. Remove the server cover. See “Remove the server cover” on page 68.
3. Remove the air baffle. See “Remove the air baffle” on page 72.
To remove a front fan, complete the following steps:
Watch the procedure
. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku:
http://list.youku.com/albumlist/show/id_50483452
Step 1. Disconnect the fan cable from the system board.
.
Hardware replacement procedures
75
Summary of Contents for ThinkSystem ST550 7X09
