Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note:
Be sure to read the Safety Information located in the Flyer before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. There are 2 kinds of usage for M14; they are normal usage and charging usage.
●
Normal usage:
There are 2 kinds of normal usage for M14; they are notebook and M14, mobile phone
and M14.
1) Connect the USB-C port of notebook and M14 with a USB type-C cable.
(Electronically marked cable, current rating: 5A)
2) Connect the USB-C port of mobile phone and M14 with a USB type-C cable.
(Electronically marked cable, current rating: 5A)
NOTE: For normal usage, devices connected to M14 need to support video signal and
power output.
When you encounter abnormal display condition, please check your devices to
see if they support USB-C Alt-mode display and PD2.0 or above. After checking,
please re-connect and try again.
1-4 M14 Flat Panel Monitor User’s Guide