Chapter 2.
2-3
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1
. Direct access controls
Icon
Control
Description
1
One Key Switch
Select “1” is Thunderbolt
™
port USB-C
function, select “2” is HDMI1/HDMI2/DP port
USB-B function
Exit
Exit from menu and return before menu
DDC-CI
Press and hold for 10 seconds to enable or
disable the DDC-CI function
2
Input Change
Switches the video input source
HDMI2.0/
HDMI1.4 Switch
For HDMI1 Port, press and hold for 5 seconds
will switch from HDMI2.0 to HDMI1.4
Increase
For increasing the value on adjustment bar/tune
In press to move to next item
Up
Right browsing key
3
Brightness
Direct access to Brightness adjustment
Down
Down key function and down circle
DP1.2/DP1.1
Switch
For DP port, press and hold for 5 seconds will
switch from DP1.2 to DP1.1
4
Menu
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Enter
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
*
Note:
One Key Switch: Press
and select
“1”
to be Thunderbolt
™
port USB-C function.
Press
and select
“2”
to be HDMI1/HDMI2/DP port USB-B function.
·1
2·
USB Type-B
Thunderbolt
