Chapter 1.
1-6
Setting up your monitor
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note:
Be sure to read the Safety information located on page iii before carrying out this
procedure
.
1. Power off your computer and all attached devices
,
and unplug the computer power cord.
2. Connect the cables according to below icon indication.
Input Connectors
:
2 x HDMI 2.0 (HDCP 2.2)
1 x DP 1.4 (HDCP 2.2)
2 x USB 3.0 (Back x 2)
1 x USB Type-C 5G (DisplayPort DP 1.2 Alternate Mode)
1 x USB Type-C 10G (DisplayPort DP 1.4 Alternate Mode)
*
Two USB Type-C Total Power Delivery up to 90W (Max.)
Input Connectors
:
2 x USB 3.0 (Front x 2,)
1 x Audio Out