Replacing CRUs
24
Replacing the storage drive
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
Replacing the 3.5-inch storage drive
1
Remove the computer cover. For details, see
2
Remove the front bezel. For details, see
3
Pivot the drive bay assembly upward. For details, see
Pivoting the drive bay assembly upward and
4
Disconnect the signal cable and the power cable from the 3.5-inch storage drive.
5
Refer to the following to replace the 3.5-inch storage drive.
• 3.5-inch primary storage drive
1
2