Replacing CRUs
30
Replacing a PCI Express card
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
1
Remove the computer cover. For details, see
2
Remove the front bezel. For details, see
3
Pivot the drive bay assembly upward. For details, see
Pivoting the drive bay assembly upward and
4
Replace a PCI Express card.
1
2
Note
If the card is held in place by a retaining latch, press the latch 1 as shown to
disengage the latch. Then, gently remove the card from the slot.
5
Reinstall the removed parts. To complete the replacement, see