Solution
: Did you follow the correct procedure when installing the operating system or program? If you
did, have the external monitor serviced.
•
Problem
: The Extend desktop function does not work.
Solution
: Enable the Extend desktop function. See “Using dual displays” on page 36.
•
Problem
: If you use the Extend desktop function, you cannot set a higher resolution or higher refresh
rate on the secondary display.
Solution
: Change the resolution and the color depth to lower settings for the primary display.
•
Problem
: Display switching does not work.
Solution
: If you use the Extend desktop function, disable it, and change the display output location. If
a DVD movie or a video clip is playing, stop the playback, close the program, and then change the
display output location.
•
Problem
: The screen position on the external monitor is incorrect when that monitor is set for a high
resolution.
Solution
: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left or
right on the screen. To correct this, first make sure that your external monitor supports the display mode
(the resolution and the refresh rate) that you have set. If it does not, set a display mode that the monitor
supports. If it does support the display mode you have set, go to the setup menu for the monitor itself
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For
details, see the documentation that comes with the monitor.
Audio problems
•
Problem
: Wave or MIDI sound does not play correctly.
Solution
: Make sure that the built-in audio device is configured correctly.
1. Open
Control Panel
.
2. Click
Hardware and Sound
.
3. Click
Device Manager
. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. Double-click
Sound, video and game controllers
.
5. Make sure that the Realtek HD Audio driver is enabled and configured correctly:
•
Problem
: Sound does not come from a headphone or a speaker, or your computer cannot record sounds.
Solution
: To switch from one device to another (for example, from a speaker to a headphone, or from
an external microphone to a built-in microphone), do the following:
1. Open Control Panel and click
Hardware and Sound
.
2. Click the
Realtek HD Manager
icon.
3. Make sure that you are in MULTI-STREAM mode in the Device advanced settings window.
4. In the Volume Mixer window, select the device you want-for example, speakers.
5. Play any sound via a music program (for example, Windows Media Player). Make sure that sound
comes from speakers now.
6. Then, if you would like to switch to a headphone, close the music program.
7. Go to the Volume Mixer window. Then select another device, which is now the headphone.
8. Play any sound via the music program. Make sure that sound comes from a headphone attached
directly to the system.
For more information, refer to the help information system of
Realtek HD Manager
.
114
User Guide
Summary of Contents for X240s
