Lenovo X240s User Manual Download

Page: 74 / 159

Note:

On the Windows 7 operating system, you can create recovery media using discs or external USB

storage devices.

To create recovery media on the Windows 7 operating system, click

Start

➙

All Programs

➙

Lenovo

ThinkVantage Tools

➙

Factory Recovery Disks

. Then, follow the instructions on the screen.

Using recovery media

On the Windows 7 operating system, you can use recovery media to restore the computer to the factory
default settings only. You can use recovery media to put the computer in an operational state after all
other methods of recovery have failed.

Attention:

When you use recovery media to restore the computer to the factory default settings, all the files

currently on the hard disk drive will be deleted and replaced by the factory default settings.

To use recovery media on the Windows 7 operating system, do the following:

1. Depending on the type of your recovery media, connect the boot medium (memory key or other USB

storage device) to the computer, or insert the boot disc into the optical drive.

2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menu window

opens, release the F12 key.

3. Select the desired startup device and press Enter. The restore process begins.

4. Follow the instructions on the screen to complete the operation.

Notes:

1. After restoring your computer to the factory default settings, you might have to reinstall device drivers

for some devices. See “Reinstalling preinstalled programs and device drivers” on page 61.

2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover

or reinstall your Microsoft Office or Microsoft Works programs, you must use the

Microsoft Office CD

Microsoft Works CD

. These discs are provided only with computers preinstalled with Microsoft

Office or Microsoft Works.

Performing backup and recovery operations

The Rescue and Recovery program enables you to back up all your hard disk drive contents including the
operating system, data files, software programs, and personal settings. You can designate where the
Rescue and Recovery program stores the backup:

• In a protected area of your hard disk drive

• On the secondary hard disk drive if a secondary hard disk drive is installed in your computer

• On an attached external USB hard disk drive

• On a network drive

• On recordable discs (a recordable optical drive is required for this option)

After you have backed up the contents on the hard disk drive, you can restore the complete contents of the
hard disk drive, restore only the selected files, or restore only the Windows operating system and programs.

Performing a backup operation

To perform a backup operation using the Rescue and Recovery program on the Windows 7 operating
system, do the following:

1. From the Windows desktop, click

Start

➙

All Programs

➙

Lenovo ThinkVantage Tools

➙

Enhanced

Backup and Restore

. The Rescue and Recovery program opens.