![background image](http://html.mh-extra.com/html/lenovo/x3300-m4-7382/x3300-m4-7382_installation-and-service-manual_203253075.webp)
Table 14. Network adapters (continued)
Network Adapters
Description
Option part
number
CRU part
number
QLogic 10Gb CNA
42C1800
42C1802
Brocade 10Gb dual-port CNA
42C1820
42C1822
Emulex 4 Gbps FC single-port PCIe HBA
42C2069
43W7510
Emulex 4Gbps FC dual-port PCIe HBA
42C2071
43W7512
Emulex 8Gb FC single-port HBA
42D0485
42D0491
Emulex 8Gb FC dual-port HBA
42D0494
42D0500
QLogic 8Gb FC single-port HBA
42D0501
42D0507
QLogic 8Gb FC dual-port HBA
42D0510
42D0516
6Gb SAS HBA Controller
46M0907
68Y7354
Brocade 8Gb FC single-port HBA
46M6049
46M6061
Brocade 8Gb FC dual-port HBA
46M6050
46M6062
NetXtreme II 1000 express quad-port Ethernet adapter
49Y4220
49Y7949
Intel Ethernet dual-port server adapter I340-T2
49Y4230
49Y4232
Intel Ethernet quad-port server adapter I340-T4
49Y4240
49Y4242
Broadcom NetXtreme II dual-port 10GBaseT adapter
49Y7910
49Y7912
Intel X520-DA2 dual-port 10GbE SFP adapter
49Y7960
49Y7962
Brocade 4Gb FC single-port HBA
59Y1987
59Y1992
Brocade 4Gb FC dual-port HBA
59Y1993
59Y1998
Broadcom NetXtreme I quad-port GbE adapter
90Y9352
90Y9355
Broadcom NetXtreme I dual-port GbE adapter
90Y9370
90Y9373
Emulex 10 GbE virtual fabric adapter III
95Y3762
9573766
Emulex 10 GbE virtual fabric adapter III lite
95Y3768
95Y3766
• Depending on your server models, the server comes with an onboard RAID controller which provides
basic RAID levels 0 and 1 functionality. The server supports the following optional RAID adapters that you
can purchase for additional RAID support. For configuration information, see the documentation that
comes with the adapter or the ServeRAID documentation at http://www.lenovo.com/support.
Attention:
Some cluster solutions require specific code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.
Attention:
Static electricity that is released to internal server components when the server is powered-on
might cause the server to stop, which might result in the loss of data. To avoid this potential problem,
always use an electrostatic-discharge wrist strap or other grounding system when working inside the
server with the power on.
To install an adapter, complete the following steps:
1. Read the safety information that begins in “Safety” on page v and “Installation guidelines” on page 34.
2. Turn off the server (see “Turning off the server” on page 24) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables from the server.
61
Summary of Contents for x3300 M4 7382
