manualshive.com logo in svg

Lenovo x3300 M4 7382, Installation And Service Manual

The Lenovo x3300 M4 7382 is a high-performance server designed for seamless business operations. To ensure hassle-free usage and maintenance, we offer the "Installation And Service Manual" which can be easily downloaded for free from our website. Unlock the full potential of this product with our comprehensive user manual.

Share
Download
background image

Table 3. Network Configuration vs. Ethernet Ports

Network
Configuration

Ethernet Port 1

Ethernet Port 2

Ethernet Port 3
(optional via FOD)

Ethernet Port 4
(option via FOD)

Network interface
port dedicated
(default)

Production Ethernet

IMM2 dedicated

Production Ethernet

Production Ethernet

Network interface
port shared

Shared by
Production Ethernet
and IMM2

Production Ethernet

Production Ethernet

Production Ethernet

•

UEFI-compliant server firmware

The UEFI firmware offers several features, including Unified Extensible Firmware Interface (UEFI)
version 2.1 compliance, Active Energy Management (AEM) technology, enhanced reliability, availability,
and serviceability (RAS) capabilities, and basic input/output system (BIOS) compatibility support.
UEFI replaces the BIOS and defines a standard interface between the operating system, platform
firmware, and external devices. The server is capable of booting UEFI-compliant operating systems,
BIOS-based operating systems, and BIOS-based adapters as well as UEFI-compliant adapters.
For more information about UEFI-compliant firmware, go to http://www.ibm.com/support/entry/
portal/docdisplay?lndocid=MIGR-5083207.

Note:

The server does not support DOS (Disk Operating System).

•

VMware ESXi embedded hypervisor

An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase.
Hypervisor is virtualization software that enables multiple operating systems to run on a host system at
the same time. See “Using the embedded hypervisor” on page 101 for additional information.

Reliability, availability, and serviceability

Three important computer design features are reliability, availability, and serviceability (RAS). The RAS
features help to ensure the integrity of the data that is stored in the server, the availability of the server when
you need it, and the ease with which you can diagnose and correct problems.

Your server has the following RAS features:
• 3-year parts and 3-year labor limited warranty (Machine Type 7382)
• 24-hour support center
• Automatic error retry and recovery
• Automatic restart on non-maskable interrupt (NMI)
• Automatic restart after a power failure
• Backup basic input/output system switching under the control of the integrated management module II

(IMM2)

• Built-in monitoring for fan, power, temperature, voltage, and power-supply redundancy
• Cable-presence detection on most connectors
• Chipkill memory protection
• Diagnostic support for ServeRAID and Ethernet adapters
• Error codes and messages
• Error correcting code (ECC) L3 cache and system memory
• Simple-swap cooling fans with speed-sensing capability
• Hot-swap hard disk drives
• Information and light path diagnostics LED panels
• Integrated Management Module II (IMM2)
• Light path diagnostics LEDs for memory DIMMs, microprocessors, hard disk drives, power supplies,

and fans

• Memory mirrored channel support (memory mirrored channel are mutually exclusive of each other)
• Memory error correcting code and parity test

Chapter 1

.

The Lenovo System x3300 M4 Type 7382 server

13

Summary of Contents for x3300 M4 7382













































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3300 M4 7382

Aastra 400 Series System Manual preview
400 Series
Brand: Aastra Pages: 592
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
Supero SUPERSERVER 6027R-TRF User Manual preview
SUPERSERVER 6027R-TRF
Brand: Supero Pages: 102
Edimax PS-1208MFg User Manual preview
PS-1208MFg
Brand: Edimax Pages: 93
Novell NETWARE 6 Manual preview
NETWARE 6
Brand: Novell Pages: 152
IBM Eserver xSeries 360 Type 8686 Installation Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 74
Gigabyte R283-S93-AAF1 User Manual preview
R283-S93-AAF1
Brand: Gigabyte Pages: 115
IBM P 615 series Service Manual preview
P 615 series
Brand: IBM Pages: 491
PRIMERGY BX600 S2 Hardware Manual preview
BX600 S2
Brand: PRIMERGY Pages: 87
Icy Box IB-NAS6220 Specifications preview
IB-NAS6220
Brand: Icy Box Pages: 3
Icy Box IB-NAS902 User Manual preview
IB-NAS902
Brand: Icy Box Pages: 17
IBM System x3550 M3 Installation And User Manual preview
System x3550 M3
Brand: IBM Pages: 160
IBM System x3650 M4 Type 7915 Installation And User Manual preview
System x3650 M4 Type 7915
Brand: IBM Pages: 192
IBM x3750 M4 Installation And Service Manual preview
x3750 M4
Brand: IBM Pages: 694
IBM System x3755 M3 7164 Installation And User Manual preview
System x3755 M3 7164
Brand: IBM Pages: 126
Advantech PAC-4010 User Manual preview
PAC-4010
Brand: Advantech Pages: 140
Dell PowerVault Manual preview
PowerVault
Brand: Dell Pages: 396
Dell PowerVault 600 Getting Started preview
PowerVault 600
Brand: Dell Pages: 180

Brands by name

Popular brands

Load more brands