Step 6.
Remove the air baffle if necessary (see “Removing the air baffle” on page 189).
Step 7.
Remove the existing fan assembly (see “Removing the fan assembly” on page 261).
Step 8.
Touch the static-protective package that contains the fan assembly; then, remove the fan assembly
from the package.
Step 9.
Slide the fan assembly down directly into the server (see step 1 in the following illustration).
Step 10. Align the release latches of the fan and make sure the fan assembly is firmly seated on the right
position (see step 2 and 3 in the following illustration).
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
00
00
00
0
0
0
0
0
0
00
00
00
00
0
0
0
0
0
0
0
0
Step 11. Connect the fan power cable on the system board. (see “Internal Cable Routing and Connectors”
Step 12. If you are instructed to return the drive backplane, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation”
on page 83.
Removing and replacing Tier 2 CRUs
You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type
of warranty service that is designated for your server.
The illustrations in this document might differ slightly from your hardware.
Removing and replacing components
263
Summary of Contents for x3300 M4 7382
