•
Power-supply error LED:
When the power-supply error LED is lit, it indicates that the power supply
has failed.
Note:
In a redundant-Power supply system, the power supply 1 is the default/primary power supply. If
power supply 1 fails, you must replace the power supply immediately.
•
USB connectors:
Connect a USB device to any of these connectors.
•
Ethernet activity LEDs:
When these LEDs are lit, they indicate that the server is transmitting to or
receiving signals from the Ethernet LAN that is connected to the Ethernet port.
•
Ethernet link LEDs:
When these LEDs are lit, they indicate that there is an active link connection on the
10BASE-T, 100BASE-TX, or 1000BASE-TX interface for the Ethernet port.
•
Ethernet connectors:
Use either of these connectors to connect the server to a network. When you use
the Ethernet 1 connector, the network can be shared with the IMM through a single network cable.
Power-supply LEDs
This section shows the power-supply LEDs on the server.
The following illustration shows the location of the power-supply LEDs (redundant power supplies) on
the rear of the server.
000000000000
000000000000
000000000000
000000000000
000000000000
000000000000
000000000000
00000000
00000000
00000000
00000000
00000000
00000000
00000000
00000000
000
000
000
000
0000
0000
00000
00000
00000
000
000
0000
0000
The following illustration shows the location of the power-supply LEDs (fixed power supplies) on the rear of
the server.
20
System x3300 M4 Installation and Service Guide
Summary of Contents for x3300 M4 7382
