manualshive.com logo in svg

Lenovo x3650 M5, Installation And Service Manual

The Lenovo x3650 M5 is an exceptional product designed for high-performance computing. To help you fully grasp its functionality and features, we provide a comprehensive Product Manual for free download on our website. Explore the vast possibilities of this remarkable device by accessing the manual at 88.208.23.73:8080.

Share
Download
background image

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained

technician.

• Go to the support website at http://www.lenovo.com/support to check for technical information, hints, tips,

and new device drivers or to submit a request for information.

Symptom

Action

The Pwr rail B error has been
recorded in the system event
log.

1. Disconnect the server power cords.

2. Remove DIMMs 1 through 12 if Pwr rail B error has been recorded in the system

event log.

3. Restart the server. If the Pwr rail B error has been recorded in the system event

log again, (trained technician only) replace the system board (see “Removing the
system board” on page 292 and “Replacing the system board” on page 294).

4. Reinstall the DIMM one at a time, restarting the server each time. If the Pwr rail

B error has been recorded in the system event log again, the DIMM that you just
reinstalled is defective. Replace the defective component.

The Pwr rail C error has been
recorded in the system event
log.

1. Disconnect the server power cords.

2. (Trained technician only) remove microprocessor 2 if Pwr rail C error has been

recorded in the system event log.

3. Restart the server. If the Pwr rail C error has been recorded in the system event

log again, (trained technician only) replace the system board (see “Removing the
system board” on page 292 and “Replacing the system board” on page 294).

4. Reinstall the Processor; then, restarting the server. If the Pwr rail C error has

been recorded in the system event log again, the Processor that you just
reinstalled is defective. Replace the defective component.

•

(Trained technician only) Microprocessor 2 (see “Removing a microprocessor

and heat sink” on page 276 and “Replacing a microprocessor and heat sink”
on page 281).

The Pwr rail D error has been
recorded in the system event
log.

1. Disconnect the server power cords.

2. Remove DIMMs 13 through 24 if Pwr rail D error has been recorded in the

system event log.

3. Restart the server. If the Pwr rail D error has been recorded in the system event

log again, (trained technician only) replace the system board (see “Removing the
system board” on page 292 and “Replacing the system board” on page 294).

4. Reinstall the DIMM one at a time, restarting the server each time. If the Pwr rail

B error has been recorded in the system event log again, the DIMM that you just
reinstalled is defective. Replace the defective component.

The Pwr rail E error has been
recorded in the system event
log.

1. Disconnect the server power cords.

2. Remove the following components if the Pwr rail E error has been recorded in

the system event log:

• Optional DVD drive (if one is installed)

• Hard disk drives at backplane assembly 1 and/or backplane assembly 2

• Hard disk drive backplane assembly 1 and/or backplane assembly 2

• LCD monitor connected to front VGA port (if one is present)

• Optional adapter (if one is present) installed in riser-card assembly 2

• Riser-card assembly 2

3. Restart the server. If the Pwr rail E error has been recorded in the system event

log again, (trained technician only) replace the system board (see “Removing the
system board” on page 292 and “Replacing the system board” on page 294).

Chapter 3

.

Troubleshooting

95

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3650 M5

Logicbus PDS Series Quick Start Manual preview
PDS Series
Brand: Logicbus Pages: 8
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Brand: Moxa Technologies Pages: 177
IESC 12H-2410 User Manual preview
12H-2410
Brand: IESC Pages: 109
Ovislink AirLive WP-203G User Manual preview
AirLive WP-203G
Brand: Ovislink Pages: 132
TYAN Transport TX46 (B4985) Service Service Manual preview
Transport TX46 (B4985) Service
Brand: TYAN Pages: 75
ZLAN ZLAN5443A User Manual preview
ZLAN5443A
Brand: ZLAN Pages: 13
IBM x3105 - System - 4347 Service Manual preview
x3105 - System - 4347
Brand: IBM Pages: 130
IBM System x3650 Type 7979 Problem Determination And Service Manual preview
System x3650 Type 7979
Brand: IBM Pages: 194
Honeywell Q7055B1047 Installation Instructions Manual preview
Q7055B1047
Brand: Honeywell Pages: 8
Honeywell LANSRLU1 Quick Start User Manual preview
LANSRLU1
Brand: Honeywell Pages: 16
Honeywell MZ-PCSV74 Planning, Installation And Service Manual preview
MZ-PCSV74
Brand: Honeywell Pages: 56
Honeywell Uniformance R300 User Manual preview
Uniformance R300
Brand: Honeywell Pages: 60
Honeywell T610 Planning, Installation And Service Manual preview
T610
Brand: Honeywell Pages: 66
Honeywell HUS-D4-E-Pro User Manual preview
HUS-D4-E-Pro
Brand: Honeywell Pages: 88
Honeywell T320 Planning, Installation And Service Manual preview
T320
Brand: Honeywell Pages: 97
Honeywell XYR301E User Manual preview
XYR301E
Brand: Honeywell Pages: 108
NEC SX-Aurora TSUBASA A300-2 User Manual preview
SX-Aurora TSUBASA A300-2
Brand: NEC Pages: 30
NEC SX-Aurora TSUBASA A300-4 User Manual preview
SX-Aurora TSUBASA A300-4
Brand: NEC Pages: 31

Brands by name

Popular brands

Load more brands