manualshive.com logo in svg

Lenovo x3650 M5, Installation And Service Manual

The Lenovo x3650 M5 is an exceptional product designed for high-performance computing. To help you fully grasp its functionality and features, we provide a comprehensive Product Manual for free download on our website. Explore the vast possibilities of this remarkable device by accessing the manual at 88.208.23.73:8080.

Share
Download
background image

Important:

Some cluster solutions require specific code levels or coordinated code updates. If the

device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.

For additional information about tools for updating, managing, and deploying firmware, see the
ToolsCenter for System x and BladeCenter at http://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/.

• Before you install optional hardware, make sure that the server is working correctly. Start the server, and

make sure that the operating system starts, if an operating system is installed, or that a 19990305 error
code is displayed, indicating that an operating system was not found but the server is otherwise working
correctly. If the server is not working correctly, see “Running the DSA Preboot diagnostic programs” on
page 82 for information about how to run diagnostics.

• Observe good housekeeping in the area where you are working. Place removed covers and other parts

in a safe place.

• Do not attempt to lift an object that you think is too heavy for you. If you have to lift a heavy object,

observe the following precautions:

– Make sure that you can stand safely without slipping.

– Distribute the weight of the object equally between your feet.

– Use a slow lifting force. Never move suddenly or twist when you lift a heavy object.

– To avoid straining the muscles in your back, lift by standing or by pushing up with your leg muscles.

• Make sure that you have an adequate number of properly grounded electrical outlets for the server,

monitor, and other devices.

• Back up all important data before you make changes to disk drives.

• Have a small flat-blade screwdriver, a small Phillips screwdriver, and a T8 torx screwdriver available.

• To view the error LEDs on the system board and internal components, leave the server connected to

power.

• You do not have to turn off the server to install or replace hot-swap power supplies, hot-swap fans, or

hot-plug USB devices. However, you must turn off the server before you perform any steps that involve
removing or installing adapter cables and you must disconnect the power source from the server before
you perform any steps that involve removing or installing a riser card.

• Blue on a component indicates touch points, where you can grip the component to remove it from or

install it in the server, open or close a latch, and so on.

• Orange on a component or an orange label on or near a component indicates that the component can be

hot-swapped, which means that if the server and operating system support hot-swap capability, you can
remove or install the component while the server is running. (Orange can also indicate touch points on
hot-swap components.) See the instructions for removing or installing a specific hot-swap component for
any additional procedures that you might have to perform before you remove or install the component.

• When you are finished working on the server, reinstall all safety shields, guards, labels, and ground wires.

System reliability guidelines

The system reliability guidelines to ensure proper system cooling.

To help ensure proper system cooling and system reliability, make sure that the following requirements
are met:

• Each of the drive bays has a drive or a filler panel and electromagnetic compatibility (EMC) shield

installed in it.

• Each of the power-supply bays has a power supply or a filler installed in it.

• If the server has redundant power, each of the power-supply bays has a power supply installed in it.

298

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3650 M5

IBM H Series Installation And Service Manual preview
H Series
Brand: IBM Pages: 438
IBM N Series Installation And Configuration Instructions preview
N Series
Brand: IBM Pages: 7
IBM eServer 200 xSeries User Reference Manual preview
eServer 200 xSeries
Brand: IBM Pages: 128
IBM eServer 232 xSeries User Reference Manual preview
eServer 232 xSeries
Brand: IBM Pages: 174
LaCie Network Space MAX Datasheet preview
Network Space MAX
Brand: LaCie Pages: 2
IBM System x3100 M4 Problem Determination And Service Manual preview
System x3100 M4
Brand: IBM Pages: 332
Thecus N12000 series User Manual preview
N12000 series
Brand: Thecus Pages: 120
Supermicro SUPERSERVER 5018D-FN8T User Manual preview
SUPERSERVER 5018D-FN8T
Brand: Supermicro Pages: 124
Omneon MediaGrid ContentServer 3000 Quick Reference Manual preview
MediaGrid ContentServer 3000
Brand: Omneon Pages: 2
IBM eserver iSeries 270 Installation Manual preview
eserver iSeries 270
Brand: IBM Pages: 40
Supermicro SuperServer 2028R-C1R(T)4+ Quick Reference Manual preview
SuperServer 2028R-C1R(T)4+
Brand: Supermicro Pages: 1
Supero SUPERSERVER 7045W-NTR+ User Manual preview
SUPERSERVER 7045W-NTR+
Brand: Supero Pages: 146
Digi ConnectPort LTS 16 Command Reference Manual preview
ConnectPort LTS 16
Brand: Digi Pages: 169
NEC SIGMABLADE AD106a Datasheet preview
SIGMABLADE AD106a
Brand: NEC Pages: 2
NEC Series3800/S120R-2 Datasheet preview
Series3800/S120R-2
Brand: NEC Pages: 2
NEC Series3800/S120R-1 Datasheet preview
Series3800/S120R-1
Brand: NEC Pages: 3
NEC Series3800/S110R-1 Datasheet preview
Series3800/S110R-1
Brand: NEC Pages: 2
NEC ServerCare Express5800/FT Warranty preview
ServerCare Express5800/FT
Brand: NEC Pages: 14

Brands by name

Popular brands

Load more brands