Lenovo x3650 M5 Installation And Service Manual Download

Page: 509 / 1340

2. Check the ambient temperature. You must be operating within the specifications (see Features

and specifications for more information).

3. Make sure that the heat sink for microprocessor n is installed correctly.

4. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

•

80070201-1107ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (PCI 7 Temp)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 800702011107ffff or 0x800702011107ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffles are in place and correctly installed, and that the server
cover is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Features

and specifications for more information).

3. Make sure that the heat sink for microprocessor n is installed correctly.

4. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

•

80070201-1108ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (PCI 8 Temp)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 800702011108ffff or 0x800702011108ffff

Severity

Error

Appendix A. Integrated management module II (IMM2) error messages

497

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands

Lenovo x3650 M5, Installation And Service Manual

Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands