Lenovo x3650 M5 Installation And Service Manual Download

Page: 828 / 1340

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffles are in place and correctly installed, and that the server
cover is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications.

3. Make sure that the heat sink for microprocessor n is installed correctly.

4. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

•

806f0a0c-2001ffff : An Over-Temperature Condition has been detected on the

[PhysicalMemoryElementName] on Subsystem [MemoryElementName]. (DIMM 1)

This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Detected.

May also be shown as 806f0a0c2001ffff or 0x806f0a0c2001ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0146

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow, that the air

baffles are in place and correctly installed, and that the server cover is installed and completely
closed.

2. Make sure that ambient temperature is within the specifications.

3. If a fan has failed, complete the action for a fan failure.

4. Replace DIMM n. (n = DIMM number)

•

806f0a0c-2002ffff : An Over-Temperature Condition has been detected on the

[PhysicalMemoryElementName] on Subsystem [MemoryElementName]. (DIMM 2)

This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Detected.

May also be shown as 806f0a0c2002ffff or 0x806f0a0c2002ffff

816

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands

Lenovo x3650 M5, Installation And Service Manual

Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands