manualshive.com logo in svg

Lenovo x3650 M5, Installation And Service Manual

The Lenovo x3650 M5 is an exceptional product designed for high-performance computing. To help you fully grasp its functionality and features, we provide a comprehensive Product Manual for free download on our website. Explore the vast possibilities of this remarkable device by accessing the manual at 88.208.23.73:8080.

Share
Download
background image

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained

technician.

• Go to the support website at http://www.lenovo.com/support to check for technical information, hints, tips,

and new device drivers or to submit a request for information.

Symptom

Action

The server goes directly to the
POST Event Viewer when it is
turned on.

1. Correct any errors that are indicated by the LCD system information display

panel (if available).

2. Make sure that the server supports all the microprocessors and that the

microprocessors match in speed and cache size. To view the microprocessor
information, run the Setup Utility and select

System Information

➙

System

Summary

➙

Processor Details

.

3. (Trained technician only) Make sure that microprocessor 1 is seated correctly.

4. (Trained technician only) Remove microprocessor 2 and restart the server.

5. Replace the following components one at a time, in the order shown, restarting

the server each time:

a. (Trained technician only) Microprocessor

b. (Trained technician only) System board

Monitor and video problems

Some monitors have their own self-tests. If you suspect a problem with your monitor, see the documentation
that comes with the monitor for instructions for testing and adjusting the monitor. If you cannot diagnose
the problem, call for service.

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained

technician.

• Go to the support website at http://www.lenovo.com/support to check for technical information, hints, tips,

and new device drivers or to submit a request for information.

Symptom

Action

Testing the monitor.

1. Make sure that the monitor cables are firmly connected.

2. Try using a different monitor on the server, or try using the monitor that is being

tested on a different server.

3. Run the diagnostic programs. If the monitor passes the diagnostic programs,

the problem might be a video device driver.

4. (Trained technician only) Replace the system board.

The screen is blank.

1. If the server is attached to a KVM switch, bypass the KVM switch to eliminate it

as a possible cause of the problem: connect the monitor cable directly to the
correct connector on the rear of the server.

2. The IMM2 remote presence function is disabled if you install an optional video

adapter. To use the IMM2 remote presence function, remove the optional video
adapter.

3. If the server installed with the graphical adapters while turning on the server,

the logo displays on the screen after approximately 3 minutes. This is normal
operation while the system loads.

4. Make sure that:

• The server is turned on. If there is no power to the server, see “Power

problems” on page 93.

90

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3650 M5

Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
HP ProLiant BL460c Gen8 User Manual preview
ProLiant BL460c Gen8
Brand: HP Pages: 84
Comtrol DeviceMaster LT User Manual preview
DeviceMaster LT
Brand: Comtrol Pages: 136
IBM 220 Service Manual preview
220
Brand: IBM Pages: 68
IBM 206m - eServer xSeries - 8485 User Manual preview
206m - eServer xSeries - 8485
Brand: IBM Pages: 92
Inspur NF5166M4 User Manual preview
NF5166M4
Brand: Inspur Pages: 147
360 Systems MAXX-2420-EX Operation Manual preview
MAXX-2420-EX
Brand: 360 Systems Pages: 148
AirLive WIAS-1200G User Manual preview
WIAS-1200G
Brand: AirLive Pages: 180
Dell EMC SD-WAN Edge 3000 Series Setup Manual preview
SD-WAN Edge 3000 Series
Brand: Dell EMC Pages: 7
Dell EMC PowerEdge T340 Installation And Service Manual preview
PowerEdge T340
Brand: Dell EMC Pages: 135
Dell EMC PowerEdge C6420 Installation And Service Manual preview
PowerEdge C6420
Brand: Dell EMC Pages: 135
Iomega 34340 - StorCenter Pro ix4-100 NAS Server Quick Start Manual preview
34340 - StorCenter Pro ix4-100 NAS Server
Brand: Iomega Pages: 40
LaCie 301161U - Ethernet Disk RAID NAS Server User Manual preview
301161U - Ethernet Disk RAID NAS Server
Brand: LaCie Pages: 140
ICP DAS USA M2M-710D User Manual preview
M2M-710D
Brand: ICP DAS USA Pages: 42
Intel SSR212MC2 - Storage Server Hard Drive Array Specification preview
SSR212MC2 - Storage Server Hard Drive Array
Brand: Intel Pages: 47
Patton 3088A Series User Manual preview
3088A Series
Brand: Patton Pages: 71
Sun Oracle Fire X4470 Installation Manual preview
Fire X4470
Brand: Sun Oracle Pages: 76
Asus AP1700 User Manual preview
AP1700
Brand: Asus Pages: 58

Brands by name

Popular brands

Load more brands