Lenovo x3650 M5 Installation And Service Manual Download | Manualshive

Page: 144 / 1340

background image

Table 10. Consumable parts, Type 8871 (continued)

Index

Description

Part number

Blank fan filler

00YE422

USB cover

00YJ761

Thermal grease

41Y9292

CPU installation/removal tool

00YJ766

To order a structural part or a consumable part, complete the following steps:

Note:

Changes are made periodically to the website. The actual procedure might vary slightly from what is

described in this document.

1. Go to http://www.ibm.com.

2. From the

Products

menu, select

Upgrades, accessories & parts

.

3. Click

Obtain maintenance parts

; then, follow the instructions to order the part from the retail store.

If you need help with your order, call the toll-free number that is listed on the retail parts page, or contact
your local representative for assistance.

Power cords

For your safety, a power cord with a grounded attachment plug is provided to use with this product. To avoid
electrical shock, always use the power cord and plug with a properly grounded outlet.

Power cords used in the United States and Canada are listed by Underwriter's Laboratories (UL) and certified
by the Canadian Standards Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord set consisting of a
minimum 16 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length and a parallel
blade, grounding-type attachment plug rated 15 amperes, 125 volts.

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and CSA-certified cord set
consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length
and a tandem blade, grounding-type attachment plug rated 15 amperes, 250 volts.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding-type
attachment plug. The cord set should have the appropriate safety approvals for the country in which the
equipment will be installed.

Power cords for a specific country or region are usually available only in that country or region.

Power cord part number

Used in these countries and regions

39M5206

China

39M5102

Australia, Fiji, Kiribati, Nauru, New Zealand, Papua New Guinea

132

Lenovo System x3650 M5 Installation and Service Guide

«
...
142
143
144
145
146
...
»

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3650 M5

Express5800/T110g-S

Brand: NEC Pages: 34

Brand: G-Technology Pages: 35

Brand: Shenzhen JingFeng Pages: 11

ApplianceStor 15MT

Brand: Rasilient Pages: 30

Anybus Communicator ABC4018

Brand: HMS Networks Pages: 64

Brand: RIOT Pages: 18

Brand: Cisco Pages: 23

Brand: Cisco Pages: 75

Brand: Cisco Pages: 132

Brand: Cisco Pages: 58

UCS 6400 Series

Brand: Cisco Pages: 68

Smart Storage NSS322

Brand: Cisco Pages: 2

Brand: QNAP Pages: 49

Brand: Promise Technology Pages: 25

Brand: Bosanova Pages: 2

Brand: Bosanova Pages: 2

Brand: Bosanova Pages: 2

Brand: MATE Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands